Shop
- Automotive
- Building Products
- Cleaning Supplies
- Clothing & Apparel
- Convenience Hardware
- Doors & Windows
- Electrical
- Electronics
- Farm & Ranch
- Food & Snacks
- Hand Tools
- Hardware
- Heating Ventilation & Air Conditioning
- Holiday Decorations & Supplies
- Home Decor
- Housewares
- Lawn & Garden
- Lawn And Garden And Ranch
- Lumber
- Office Supplies
- Outdoor Living
- Outdoor Power Goods
- Paint
- Paint & Painting Supplies
- Pet Supplies
- Plumbing
- Plumbing Supplies
- Power Tools & Accessories
- Safety
- Seasonal
- Sporting Goods
- Storage & Organization
- Tools
- Toys & Games
- True Value New Sku
-
$22.50Adjustable for various roof pitches from 0/12 to 6/12. Covers 2 In. space around chimney where pipe passes through a sloped ceiling for an attractive finish. Matte black finish. No assembly required.
-
$46.50Used wherever a ceiling support, finish support, or firestop is installed below an open attic. Required to guard against the hazard of blown-in or blanket insulation filling any framed opening or contacting the chimney and possible storage of combustibles against the chimney. Usable for new and retrofit installations. Half cylinder…
-
$75.00For use when installing a Model SSII chimney in an A-frame, mobile home, or in a ceiling under a narrow section of roof. It provides a finished installation at a ceiling level and will support up to 20′ of 6″ or 8″ diameter chimney. The part also can be used…
-
$67.50With proper framing, both ceiling supports assure at least 2″ minimum clearance to combustibles at the support level and can carry up to 50′ of vertical chimney height. Square trim plate. Matte black finish.
-
$12.00Round collar fits over lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Dripless Smoke Pipe Adapter part to lower end of chimney or to insulated tee. Matte black finish.
-
$9.50Designed to fit on the round chimney pipe just above the roof flashing.The upper edge should be waterproofed with plastic sealer to prevent any water from leaking between the storm collar and chimney pipe. Part is tightened with screws or tabs after proper positioning. 5-1/2″ H.
-
$40.00Installs quickly and eliminates the need for using individual firestops. The round shielding acts as a radiation shield and provides the required 2″ air space clearance to combustibles. The 2 sections telescope to accommodate 6″ to 11″ wall thickness.
-
$41.50(DSAC)-with coupler. For use in new installations, this part can be installed by twist-locking the coupler on the DSAC into the first section of Model SSII type HT chimney pipe. Used to connect either model DS smoke pipe or single wall stove pipe to SSII type HT insulated chimney pipe.…
-
$35.00(DSA)-without coupler. For use in retrofit installations, this part can be installed from below with a finish support package and secured with screws. Used to connect either model DS smoke pipe or single wall stove pipe to SSII type HT insulated chimney pipe. The part is designed to slip inside…
-
$65.00Can be used whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load and to prevent damage from static and sliding snow. Up to 4′ above the roof requires no bracing. From 5′ to…
-
$95.00For freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily onto top of roof through opening that allows 2″ clearance. Maximum length of chimney which can be suspended below is 20′. Maximum total length is 30′. The Roof Support Kit (RSK)…
-
$19.00Used along wall to provide for 2 In. clearance and assure stability. Also useful for suspending offsets. Required at 8 Ft. or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall. Actual band diameter is 8 In. to allow for 2 In. clearance on 6…
-
$200.00Provides the support package and termination parts for a chimney that is supported by a flat ceiling and passes through an attic area and penetrates a 2/12 to 6/12 pitch roof. Contains: Round top, storm collar, flashing, attic insulation shield, finish support package, and a smokepipe adapter with coupler.
-
$112.50Used to start chimneys indoors or outdoors using a wall support assembly or masonry pier. Insulated tee cap included, removable for inspection and cleanout. Maximum height of chimney which can be supported by an insulated tee is 50′.
-
$8.50For increasing stability of Sure-Temp stainless steel insulated pipe. Inward flanges around the band fit into grooves at pipe joints. Reinforces joints of chimney suspended below support assemblies and prevents accidental uncoupling. Reinforces joints of chimney extending above roof and should be used at every joint. Stainless steel. Locking bands…
-
$172.50For installation of a chimney in a cathedral or pitched ceiling such as standard A-frame construction. The Pitched Ceiling Support Kit provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and adjustable flashing. Contains: Round top, storm collar, roof support package, adjustable…