Plumbing Sharkbite Fittings
-
$4.75SharkBite Clamp Rings are intended for use in a PEX system using barb fittings. These rings are tightened down using a PEX Clamp Tool. Clamp Tool works with any sized clamp rings up to 1 In.
-
$6.00Male iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride)…
-
$6.50For O.D. controlled copper CPVC or Pex – Certified to 200 P.S.I. and 200 deg. F. – IGC 188 and ANSI/NSF-61 certified. Low lead.
-
$3.00SharkBite’s PEX Barb Reducing Tees come in a variety of different sizes and allow for pipe-size reduction in multiple ways. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system, or a copper…
-
$8.50Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$3.00SharkBite’s PEX Barb Reducing Tees come in a variety of different sizes and allow for pipe-size reduction in multiple ways. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system, or a copper…
-
$8.50Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$7.00Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$21.50Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$6.0090 deg. MNPT elbow. For O.D. controlled copper CPVC or Pex – Certified to 200 P.S.I. and 200 deg. F. – IGC 188 and ANSI/NSF-61 certified. Low lead. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$2.15The SharkBite PEX Barb Elbow is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing at a 90 Deg. angle. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used…
-
$14.50The SharkBite PEX Barb Elbow is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing at a 90 Deg. angle. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used…
-
$5.50Female iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I.…
-
$5.50Male iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride)…
-
$6.50Sharkbite push-fit x FNPT lead-free brass elbow, used to make a 90 transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an FNPT threaded connection. Innovative push-to-connect design makes for quick and easy transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an FNPT threaded connection. Ideal for…
-
$8.50SharkBite push-to-connect polybutylene conversion coupling. The fastest, easiest way to transition from polybutylene pipe over to PEX (Coss-linked Polyethylene), copper, CPVC (Chlorinated Polyvinyl Chloride), and PE-RT – wet or dry. Approved to be used underground (wrap required in burial installation) and behind walls without access panels. Fittings are certified to…