Plumbing Sharkbite Fittings
-
$6.00SharkBite 45-Degree Elbows allow the user to connect any combination of copper, PEX CPVC, or PE-RT pipe together to form a 45-degree connection. Lead free DZR brass construction for durability and reliability. These are ideal for hard piping applications where a 90-degree bend is too much. With no soldering, clamps,…
-
$16.00Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$5.50Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$1.75The SharkBite PEX Barb Elbow is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing at a 90 Deg. angle. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used…
-
$11.50The SharkBite PEX Barb Elbow is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing at a 90 Deg. angle. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used…
-
$4.75Female iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I.…
-
$16.00Female iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I.…
-
$4.75Male iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride)…
-
$16.00Male iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride)…
-
$5.50Sharkbite push-fit x FNPT lead-free brass elbow, used to make a 90 transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an FNPT threaded connection. Innovative push-to-connect design makes for quick and easy transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an FNPT threaded connection. Ideal for…
-
$5.5090 deg. MNPT elbow. For O.D. controlled copper CPVC or Pex – Certified to 200 P.S.I. and 200 deg. F. – IGC 188 and ANSI/NSF-61 certified. Low lead. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$17.50The SharkBite PEX Barb Tee is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel…
-
$8.00The SharkBite PEX Poly Alloy Barb Tee is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite PEX Poly Alloy Barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system, or a…
-
$7.50Brass push fitting – no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed…
-
$23.00Brass push fitting – no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed…
-
$14.00SharkBite stop tee allows the user to tap into existing supply lines to add fixtures and appliances with the speed and convenience of push-fit connections to the final phase of plumbing projects. The SharkBite stop tee can be used on Copper, CPVC, PEX and PE-RT. Approvals include ASSE 1061, ASME…