Plumbing Sharkbite Fittings
-
-
$6.00Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F, 200 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product…
-
$6.50Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F, 200 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product…
-
$4.75Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$14.50Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$9.00Slip couplings are the most efficient way to repair a burst pipe or leak. A slip fitting does the job of two couplings and extra pipe. Only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. The fittings…
-
$5.00Coupling. Brass push fitting – no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. It is made of 1-piece DZR brass. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi. Designed for potable water…
-
$14.50Coupling. Brass push fitting – no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. It is made of 1-piece DZR brass. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi. Designed for potable water…
-
$16.00Used to control and shut off water flow to fixtures or appliances for maintenance and repair. Innovative design with 1/2 In. push-to-connect inlet makes for quick installation and quarter-turn, full-port brass ball valve makes for easy operation. Ideal for working in tight spaces. Faster install time and ease of use…
-
$23.00Typically used on stub-outs coming out of the wall. Used to control and shut off water flow to fixtures or appliances for maintenance and repair. Innovative design with 1/2 In. push-to-connect inlet makes for quick installation and quarter-turn full-port brass ball valve makes for easy operation. Ideal for working in…
-
$13.00Typically used on stub-outs coming out of the wall. Used to control and shut-off water flow to the fixture for maintenance and repair. Innovative design with 1/2 In. push-to-connect inlet and two 3/8 In. compression outlets make for quick installation and quarter-turn full-port brass ball valve makes for easy operation.…
-
$8.501/2 In. SB x 1/2 In. x 8 in. L Copper Tube. Stub-Out Elbow used during rough-in plumbing phase to enable a fixture to be installed after the drywall is completed and painted. Innovative push-to-connect design makes for quick and easy installation during rough-in to enable a fixture to be…
-
$7.00Chrome-plated brass angle stop valve. The fitting can be used with copper, CTS (copper tube size), PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Fahrenheit), 200 psi (pounds per square in). it is made of 1-piece DZR (dezincification-resistant) brass. Fittings can be buried…
-
$8.00SharkBite No-Kink 45 Degree Hose Bibb combines a push-to-connect inlet with a 3/4 In. outlet connection at a 45 degree angle to prevent hose kinks. The hose bibb has a durable one-piece forged body for strength and comes with an integrated mounting flange to secure the valve to the mounting…
-
$7.00Chrome-plated brass angle stop valve. The fitting can be used with copper, CTS (copper tube size), PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Fahrenheit), 200 psi (pounds per square in). it is made of 1-piece DZR (dezincification-resistant) brass. Fittings can be buried…
-
$4.00SharkBite Clamp Rings are intended for use in a PEX system using barb fittings. These rings are tightened down using a PEX Clamp Tool. Clamp Tool works with any sized clamp rings up to 1 In.