Plumbing Pvc/Cpvc Fittings
-
$5.00PVC Construction, stainless steel spring loaded PVC poppet with resilient neoprene seal. Rated at 200 P.S.I. at 72 deg. F. (not for use with compressed air). Thread ends comply with ANSI B2.1. Packaged 1 per box. Import.
-
$3.00Full size solvent welds to PVC pressure piping systems. Schedule 40 pressure fitting. Use on cold water systems only. Not for use with compressed air.
-
$1.75Solvent weld. White Schedule 40 PVC. Fits both Schedule 40 and Schedule 80 PVC pipe. Rated at 150 P.S.I. at 73 deg. F. Santoprene seals, large flow area, quarter turn operation, removable handle. Solvent ends comply with ASTM D2466. Not for use with compressed air. Import.
-
$9.50PVC Construction, stainless steel spring loaded PVC poppet with resilient neoprene seal. Rated at 200 P.S.I. at 72 deg. F. (not for use with compressed air). Thread ends comply with ANSI B2.1. Packaged 1 per box. Import.
-
$9.50Solvent weld. White Schedule 40 PVC. Fits both Schedule 40 and Schedule 80 PVC pipe. Rated at 150 P.S.I. at 73 deg. F. Santoprene seals, large flow area, quarter turn operation, removable handle. Solvent ends comply with ASTM D2466. Not for use with compressed air. Import.
-
$11.50PVC Schedule 80 grey ball valve solvent weld. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and Schedule 40 pipe. Pipe ends meets ANSI B1.20.1, solvent ends comply with ASTM 2466. Import.
-
$4.50CPVC ball valve solvent weld. Rated at 100 P.S.I. at 180 deg. F. Meets NSF standards for low lead. For use with hot or cold water. PTFE seats. EPDM O-rings. Solvent ends comply with ASTM 2846. Import.
-
$2.00White Schedule 40 PVC. Fits Schedule 40 and Schedule 80 PVC pipe. Rated 150 P.S.I. at 73 deg. F. Santoprene seals, large flow area, 1/4 turn operation, removable handle. Threaded ends comply with ANSI B2.1. Not for use with compressed air. Import.
-
$4.25PVC Construction, stainless steel spring loaded PVC poppet with resilient neoprene seal. Rated at 200 P.S.I. at 72 deg. F. (not for use with compressed air). Thread ends comply with ANSI B2.1. Packaged 1 per box. Import.
-
$4.25PVC Schedule 80 grey ball valve solvent weld. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and Schedule 40 pipe. Pipe ends meets ANSI B1.20.1, solvent ends comply with ASTM 2466. Import.
-
$1.90Solvent weld. White Schedule 40 PVC. Fits both Schedule 40 and Schedule 80 PVC pipe. Rated at 150 P.S.I. at 73 deg. F. Santoprene seals, large flow area, quarter turn operation, removable handle. Solvent ends comply with ASTM D2466. Not for use with compressed air. Import.
-
$3.75Full size solvent welds to PVC pressure piping systems. Schedule 40 pressure fitting. Use on cold water systems only. Not for use with compressed air.
-
-
$4.25Total knockout, flush to floor, closet flange will not break apart and cannot fall down drain pipe. Easier installation, no need to hold knockout while hammering. Holds 5 floor (22 P.S.I.) for head test. The inside diameter of pipe can vary significantly. These flanges are designed to fit inside most,…
-
-
$9.50Gasket seals inside DWV pipe. Strong, adjustable stainless steel swivel ring means you adjust the ring, not the flange. No chance of breaking gasket seal. Engineered elastomer gasket is chemical and heat-resistant. Gasketed 3″ inside fit, 4″ long tailpiece.