Plumbing Clearance Plumbing
-
$30.00Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4″ thru 3″). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2″ thru 2″). CSA-3-88 (5 PSIG) certified (1/4″ thru 2″). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2″ thru 1″). UL LP gas 400 P.S.I. Meets federal…
-
$3.75Prevents electrolysis or galvanic action when connecting dissimilar materials. For use with water up to 210 F (degree Farenheit). Increases the life of water heaters. Threaded ends comply with ANSI (American National Sanitation Institute) B1.20.1. Solder ends comply with ANSI B16.18. Manufactured to include no more than 0.25% weighted average…
-
$3.65Attached to sill cocks, valves, and hydrants with Male hose thread outlet. For indoor or outdoor use. Designed to prevent dangerous back siphonage and back flow. Furnished with break-a-way lock screw if vandal-resistant installation is desired. For nonfreezing areas only. Designed to protect hose connections from contamination where temperatures do…
-
$7.50Styles B. Universal terminal block kit. Fits plug-in electric ranges including GE, Hotpoint, Kenmore (1995-2004), and RCA.
-
$10.006 pole connection. Used for single element Sta-Kleen heaters with exposed control knob. Replaces No. WH7-4D. Can be used to replace thermostats on most residential electric water heaters. Thermostats are set at 120 F. and are adjustable between 110 F and 160 F Thermostats include a Safety Energy Cut Off…
-
$6.00The most popular element in use today. Fits Private Label, State, Reliance , Rheem, Ruud, Sears, Montgomery Ward, and many other brands. Replacement part for: A.O. Smith, A.O. Smith Canada, American, GSW, John Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Penfield, Reliance, Sears, State Industries, U.S. Craftmaster, Whirlpool. Fits: Bradford White, General…
-
$184.50Electric water heater. Dual 4500W, 240V elements. 2 In. foam insulation. T & P relief valve, PEX polymer lined heat trap nipples. PEX dip tube, glass lined tank, magnesium anode rod. 6-year tank & parts warranty. Shipped with an insulation blanket.
-
$227.50Electric water heater, dual 4500W, 240V elements, insulated. 0.95 Energy Factor. T & P valve, PEX polymer lined heat trap nipples. PEX dip tube, glass lined tank, anode rod. 6 year tank & parts warranty. Meets new NAECA 2015 Efficiency Standards.
-
$245.95Liquid propane water heater. For installations from sea level to 10,100 Ft., 0.62 Energy Factor. Draft diverter outlet size: 3 In. with integrated adapter for 4 In. vent option. T & P relief valve, glass lined tank, anode rod. PEX polymer lined heat trap nipples. PEX dip tube, Next Generation…
-
$277.50Electric water heater, dual 4500W, 240V elements, insulated. 0.95 Energy Factor. T & P valve, PEX polymer lined heat trap nipples. PEX dip tube, glass lined tank, anode rod. 6 year tank & parts warranty. Meets new NAECA 2015 Efficiency Standards.
-
$6.00To adapt screw in elements to older model water heater. Will adapt square or round flange bracket to threaded element. 1 kit per card. Kit includes: (1) round gasket, (2) plates, (4) stove bolts and nuts, and (4) self tapping screws. Fits: A.O. Smith, A.O. Smith Canada, American, GSW, John…
-
$11.50The ultimate liquid sulphuric acid drain cleaner for clearing stubborn sink/floor drains, grease traps, and septic tanks. Designed to dissolve grease/food residue, hair, soap, and paper. Comes in plastic container.
-
$8.50Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product…
-
$7.50Male iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride)…
-
$6.00SharkBite 1/2″ x 1/4″ OD brass barb compression chrome angle stop quarter turn 1 per bag. Suitable for installing at the end of an ice maker supply line or waste drain. The SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower…
-
$6.50For O.D. controlled copper CPVC or Pex – Certified to 200 P.S.I. and 200 deg. F. – IGC 188 and ANSI/NSF-61 certified. Meets UPC, IPC, and CUPC requirements for potable and hydronic heating water distribution. 1/2″ x 1/2″ F.