Valves & Parts Valves
-
$9.00Forged brass chrome-plated full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/8″ thru 3″). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2″ thru 2″). CSA 3-88 (5 PSIG) certified (1/2″ thru 2″). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2″ thru 1″). UL LP gas 400 P.S.I.…
-
$6.40Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position.…
-
$9.50Forged brass chrome-plated full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/8″ thru 3″). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2″ thru 2″). CSA 3-88 (5 PSIG) certified (1/2″ thru 2″). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2″ thru 1″). UL LP gas 400 P.S.I.…
-
$9.15Heavy forged brass construction, 1-piece body, chrome-plated forged brass ball, coated aluminum handle. For use with natural, manufactured, mixed, liquified petroleum, and L.P. gas/air mixtures. Design certified by the American Gas Association. Pipe threads comply with ANSI B1.20.1. 15/16″ flare x 3/4″ F.I.P. Import.
-
$11.00PVC Schedule 80 grey ball valve F.I.P. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and schedule 40 pipe. Pipe ends meet ANSI B1.20.1. Import. PVC valves not for use with compressed air.
-
$62.50Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import.
-
$39.00Brass full port packing gland ball valve solder. 600 psi (pounds per square inch) nonshock WOG (water oil gas) (1/2″ thru 2″). 400 psi nonshock (2-1/2″ thru 4″). CSA (Canadian Standards Association) – CR91-002 (1/2″ thru 2″). CSA – CR88 (1/2″ thru 2″). Packing gland provides means of replacing or…
-
$6.65Valve fastens to vertical pipe with handle on top. Hose connection angles from valve to eliminate kinking. Female thread inlet. 3/4″ hose thread out. Cast-iron handle. Large full flow area. Rough brass. Import.
-
$8.75Heavy construction. Oversized notched flange for stable installation. Large cast-iron handle. Lockshield prevents use of valve when handle is removed. Import.
-
$8.50Brass full port packing gland ball valve FIP (female iron pipe) with stainless steel Tee handle. 600 psi (pounds per square inch), nonshock WOG (water oil gas) CSA (Canadian Standards Associations) – CR91002 and CSA – CR88 packaging gland provides means of replacing or adjusting the seal on the valve…
-
$19.00Flat way. Female I.P. threads both ends. With dust cap and loose iron tee handle. Import. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$8.75Quartermaster brass sillcock F.I.P. Quarter turn. Meets ANSI/NSF 61-9. CSA certified. UPC approved complies with ASME A112.18.1 standards. Notched flange for easy installation. Maximum 125 P.S.I. working pressure. Chrome-plated brass ball, with seats. 3/4 hose thread. Pipe ends comply with ANSI B1.20.1. Hose ends comply with ANSI B1.20.7. Solder ends…
-
$17.00Rising stem, bronze to bronze seat. 125 psi (pounds per square inch) steam, 200 psi water, oil, or air working pressure. Import. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$3.90PVC Schedule 80 grey ball valve F.I.P. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and schedule 40 pipe. Pipe ends meet ANSI B1.20.1. Import. PVC valves not for use with compressed air.
-
$2.25Schedule 40 PVC full port ball valves, non-NSF. Rated 150 P.S.I. at 73 F. Quarter turn T-handle. Corrosion resistant. For indoor/outdoor use. Not for potable water.
-
$4.00Highly chemical-resistant molded Celcon . Valve performs at temperatures of -20 deg. to 180 deg. F. and pressure up to 150 lb. Unique washerless design requires no stem washer. May be used in all normal water applications and abnormal fluids such as gasoline, cleaning fluids, etc.