Valves & Parts Valves
-
$34.00Brass full port packing gland ball valve solder. 600 psi (pounds per square inch) nonshock WOG (water oil gas) (1/2″ thru 2″). 400 psi nonshock (2-1/2″ thru 4″). CSA (Canadian Standards Association) – CR91-002 (1/2″ thru 2″). CSA – CR88 (1/2″ thru 2″). Packing gland provides means of replacing or…
-
$8.50PVC Schedule 80 grey ball valve solvent weld. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and Schedule 40 pipe. Pipe ends meets ANSI B1.20.1, solvent ends comply with ASTM 2466. Import.
-
$6.65Schedule 40 PVC full port ball valves, non-NSF. Rated 150 P.S.I. at 73 F. Quarter turn T-handle. Corrosion resistant. For indoor/outdoor use. Not for potable water.
-
$21.50Brass full port packing gland ball valve F.I.P. 600 psi nonshock WOG (Water, Oil, Gas) (1/2″ thru 2″). 400 psi nonshock (2-1/2″ thru 4″). CSA – CR91-002 (1/2″ thru 2″). CSA – CR88 (1/2″ thru 2″). Packing gland provides means of replacing or adjusting the seal on the valve stem…
-
$20.00Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4″ thru 3″). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2″ thru 2″). CSA-3-88 (5 PSIG) certified (1/4″ thru 2″). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2″ thru 1″). UL LP gas 400 P.S.I. Meets federal…
-
$7.00PVC Schedule 80 grey ball valve F.I.P. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and schedule 40 pipe. Pipe ends meet ANSI B1.20.1. Import. PVC valves not for use with compressed air.
-
$34.00Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25% weighted average lead…
-
$25.00Brass construction, right hand threads on both inlet and outlet connections, rubber seal disc, composition wheel handle. Import.
-
$27.50Brass full port packing gland ball valve solder. 600 psi (pounds per square inch) nonshock WOG (water oil gas) (1/2″ thru 2″). 400 psi nonshock (2-1/2″ thru 4″). CSA (Canadian Standards Association) – CR91-002 (1/2″ thru 2″). CSA – CR88 (1/2″ thru 2″). Packing gland provides means of replacing or…
-
$7.00PVC Schedule 80 grey ball valve solvent weld. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and Schedule 40 pipe. Pipe ends meets ANSI B1.20.1, solvent ends comply with ASTM 2466. Import.
-
$5.75Valve fastens to vertical pipe with handle on top. Hose connection angles from valve to eliminate kinking. Female thread inlet. 3/4″ hose thread out. Cast-iron handle. Large full flow area. Rough brass. Import.
-
$8.25Heavy construction. Oversized notched flange for stable installation. Large cast-iron handle. Lockshield prevents use of valve when handle is removed. Import.
-
$9.50Forged brass ball valve compression end. 200 P.S.I. water, oil, or air. Meets ANSI/NSF 61-1999A. Suitable for vacuum use up to 7 P.S.I. Compression connections for solders connection to copper tubing. Temperature range -20 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25% weighted average…
-
$7.50Brass full port packing gland ball valve F.I.P. 600 psi nonshock WOG (Water, Oil, Gas) (1/2″ thru 2″). 400 psi nonshock (2-1/2″ thru 4″). CSA – CR91-002 (1/2″ thru 2″). CSA – CR88 (1/2″ thru 2″). Packing gland provides means of replacing or adjusting the seal on the valve stem…
-
$18.00Flat way. Female I.P. threads both ends. With dust cap and loose iron tee handle. Import. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$13.00Rising stem, bronze to bronze seat. 125 psi (pounds per square inch) steam, 200 psi water, oil, or air working pressure. Import. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.