Valves & Parts Valves
-
$35.00Flat way. Female I.P. threads both ends. With dust cap and loose iron tee handle. Import. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$14.00Brass construction with 1-piece body. A.G.A. certified for use with natural, manufactured, mixed, liquified petroleum and LP gas/air mixtures, and temperatures up to 149 deg. F. May be used with water. Threaded ends comply with ANSI B2.1. Both ends are 1″ Female pipe thread. Quarter-turn operation. Import.
-
$13.25Brass construction with 2-piece body. AGA (American Gas Association) certified for use with natural, manufactured, mixed, liquified petroleum, and LP gas/air mixtures and temperatures up to 149 deg. F. May be used with water. Threaded ends comply with ANSI B2.1(American National Standards Institute). Both ends are Female pipe thread. Quarter-turn…
-
$4.45PVC Schedule 80 grey ball valve F.I.P. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and schedule 40 pipe. Pipe ends meet ANSI B1.20.1. Import. PVC valves not for use with compressed air.
-
$3.35Schedule 40 PVC full port ball valves, non-NSF. Rated 150 P.S.I. at 73 F. Quarter turn T-handle. Corrosion resistant. For indoor/outdoor use. Not for potable water.
-
$20.00Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25% weighted average lead…
-
$7.00Valve fastens to vertical pipe with handle on top. Hose connection angles from valve to eliminate kinking. Female thread inlet. 3/4″ hose thread out. Cast-iron handle. Large full flow area. Rough brass. Import.
-
$19.00Brass construction, right hand threads on both inlet and outlet connections, rubber seal disc, composition wheel handle. Import.
-
$14.75Brass full port packing gland ball valve solder. 600 psi (pounds per square inch) nonshock WOG (water oil gas) (1/2″ thru 2″). 400 psi nonshock (2-1/2″ thru 4″). CSA (Canadian Standards Association) – CR91-002 (1/2″ thru 2″). CSA – CR88 (1/2″ thru 2″). Packing gland provides means of replacing or…
-
$14.00Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4″ thru 3″). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2″ thru 2″). CSA 3-88 (5 PSIG) certified (1/4″ thru 2″). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2″ thru 1″). UL LP gas 400 P.S.I. Meets…
-
$12.00This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem.…
-
$3.35Schedule 40 PVC full port ball valves, non-NSF. Rated 150 P.S.I. at 73 F. Quarter turn T-handle. Corrosion resistant. For indoor/outdoor use. Not for potable water.
-
$40.00Forged brass chrome-plated full port ball valve FIP (female iron pipe). 600 PSI (pounds per square inch), nonshock WOG (water, oil, gas) (1/8″ thru 3″). 150 psi wsp (working steam pressure) steam. Meets ANSI (American National Standards Institute)/NSF (National Sanitation Foundation) 61-1999A (1/2″ thru 2″). CSA (Canadian Standards Associations) 3-88…
-
$8.25PVC Schedule 80 grey ball valve F.I.P. Rated at 150 P.S.I. at 73 deg. F. Meets NSF standards for low lead. PTFE seats. EPDM O-rings. Fits both Schedule 80 and schedule 40 pipe. Pipe ends meet ANSI B1.20.1. Import. PVC valves not for use with compressed air.
-
$6.65Schedule 40 PVC full port ball valves, non-NSF. Rated 150 P.S.I. at 73 F. Quarter turn T-handle. Corrosion resistant. For indoor/outdoor use. Not for potable water.
-
$47.50Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25% weighted average lead…