Plumbing Supplies Pumps & Accessories
- Pumps & Accessories Hoses & Fittings
- Pumps & Accessories Pneumatic Water System Components
- Pumps & Accessories Pressure Tanks & Miscellaneous Parts
- Pumps & Accessories Pump Accessories
- Pumps & Accessories Pump Parts
- Pumps & Accessories Sewage Pumps
- Pumps & Accessories Specialty Pumps
- Pumps & Accessories Sump Pumps
- Pumps & Accessories Utility Portable Pumps & Miscellaneous
- Pumps & Accessories Water Detectors & Alarms
- Pumps & Accessories Well Parts & Supplies
- Pumps & Accessories Well Pumps
-
$14.50Slotted steel mounting deck attaches to top of any vertical well tank. Powder coated finish resists corrosion and damage from moisture. Mounting hardware included. 7-1/2″ x 9″.
-
$290.00Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm…
-
$115.00Factory pre-charge: 38 psi (pounds per square inch). Maximum working pressure: 100 psi. Maximum operating temperature 200 F (degree Fahrenheit). Meets NSF (National Sanitation Foundation) Standard 61 requirements for clean, safe drinking water. Inline pressure tank, heavy-duty steel shell with high-gloss enamel finish. Bacteria-resistant butyl rubber diaphragm with seamless construction…
-
$32.50As required by plumbing codes in some areas to provide residential protection for public water supplies. For installations immediately downstream from residential water meters. Bronze body construction. F.I.P.S. connections. Can be installed horizontally or vertically. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$31.50As required by plumbing codes in some areas to provide residential protection for public water supplies. For installations immediately downstream from residential water meters. Bronze body construction. F.I.P.S. connections. Can be installed horizontally or vertically. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$150.00The Wayne WCS50T cast iron sewage pump is great for sewage basins, septic tanks and lift stations. Features a heavy-duty 1/2 hp (horsepower) motor and a tethered switch for automatic operation. The vortex impeller design reduces clogs and the rugged cast iron housing provides durability.
-
$110.00Portable Electric Water Transfer Pump. Wayne’s 1/2 HP (horsepower) 115V (volt) powerful cast iron, transfer water pump can pump water out of flooded basements, stock tanks, or boats with ease. It can also increase line pressure by up to 50 psi (pounds per square inch) to water lawns and gardens,…
-
$60.00The Wayne PC2 portable electric water transfer water pump is powered by a compact but powerful 115 volt motor. Lifts water over 35 Ft., removes water down to 1/8 In. of surface with suction attachment (included). Rugged, metal pump and motor housing. Non-submersible. Maximum flow is 340 gallons per hour,…
-
$120.001/2 HP pumps up to 3900 GPH at a 5′ lift. Durable cast-iron base. Corrosion-resistant stainless steel fasteners. Replaceable piggy-back tether float switch for automatic operation. Oil-filled, thermally protected motor prevents overheating. Top suction screen filters debris. High capacity 1-1/2″ NPT discharge. Will replace most submersible sumps without any plumbing…
-
$145.00The Wayne 1/2 HP (horsepower) 420 GPH (gallons per hour) shallow well jet pump is designed for wells up to 25′ deep with jet pumps housed in rugged cast iron housing. The pump can run at 115V or 230V with the quick change voltage selection switch. The pressure switch is…
-
$165.00The Wayne CWS50 1/2 HP (horsepower) convertible well jet pump is the perfect pump for wells up to 90′ deep. Assembled in the US, this convertible well jet pump is made of rugged cast iron and perfect for the job. 3/4″ NPT (National pipe thread) discharge with 1-1/4″ NPT suction…
-
$65.00Pumps up to 2500 GPH at 0′. Reinforced thermoplastic submersible sump pump. Piggyback tether float switch for automatic or manual operation. Top suction design filters debris and prevents clogging from debris in bottom of sump pit. Designed for easy installation without any plumbing changes. High performance 1/3 HP motor. 1-1/2″…
-
$107.50Auto On/Off pool cover water removal pump. Maximum flow rate is 3000 GPH (gallons per hour) using 1-1/4 In. drain hose. Includes: Check-valve with 3/4 In. garden hose adapter to reduce repetitive cycling, 25 Ft. power cord (always plug into a GFCI (ground fault circuit interrupter) outlet), 25 Ft. pull-to-shore…
-
$100.00The Wayne EEAUP250 1/4 HP (horsepower) water removal pump is ideal for crawl spaces, flat roofs, window wells, and other problem areas around the home where water accumulates. Its energy efficient oil-free motor pumps up to 3,000 GPH (gallons per hour) and removes water down to within 3/8″ of the…
-
$55.00The Wayne 1/4 H.P. (Horsepower) is a submersible portable utility pump designed to make water moving tasks easier. Typical applications include removing standing water, draining tanks, and aquariums, emptying clogged sinks and tubs, and boosting water pressure. Portable electric water removal pump lifts water over 25′; removes water down to…
-
$50.00Portable electric water removal pump, pumps dirty water with small (1/2″) solids; removes water down to 3/8″ of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/5 HP; max. flow rate is 1700 GPH (gallons per hour); 780 GPH at 10′ of discharge lift. 1-1/4″ discharge with 3/4″ garden hose…