Pipe Fittings Brass Pipe Fittings
-
$9.00Heavy-duty red brass coupling with hex shoulder, for use with polyethylene pipe. Insert x insert. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$3.951/4 In. Male Pipe Thread x 1/4 In. Inverted Female Flare is most commonly used on some auto change over dual stage regulators. Solid brass construction.
-
$9.50Low lead cast brass solder joint fitting, reducing tee. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces. Used to join copper pipe.
-
$9.50Low lead cast brass solder joint fitting, reducing tee. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces. Used to join copper pipe.
-
$11.25Install quickly with a simple hand wrench. Simply tighten the nut onto the valve, causing the sleeve to compress around the pipe while the internal barb and double o-ring seal produces a leak-free connection. Double o-ring seals offer leak-free protection. Split ring and internal barb keep pipe in round. Quarter…
-
$11.25Install quickly with a simple hand wrench. Simply tighten the nut onto the valve, causing the sleeve to compress around the pipe while the internal barb and double o-ring seal produces a leak-free connection. Double o-ring seals offer leak-free protection. Split ring and internal barb keep pipe in round. Quarter…
-
$10.00Install quickly with a simple hand wrench. Simply tighten the nut onto the valve, causing the sleeve to compress around the pipe while the internal barb and double o-ring seal produces a leak-free connection. Double o-ring seals offer leak-free protection. Split ring and internal barb keep pipe in round. Quarter…
-
$11.25Install quickly with a simple hand wrench. Simply tighten the nut onto the valve, causing the sleeve to compress around the pipe while the internal barb and double o-ring seal produces a leak-free connection. Double o-ring seals offer leak-free protection. Split ring and internal barb keep pipe in round. Quarter…
-
$75.00Includes products required to install a pressure tank. Solid brass construction – no lead. Threaded connections on inlets and outlets. 1 In. x 11 In. tank tee and 40-60 psi pressure switch.
-
$3.50Accessory Pack Pro-Flex Accessory Packs include 4 retainer rings, 2 slide rings, 2 O-rings, and 2 High Temp rings.
-
$3.50Accessory Pack Pro-Flex Accessory Packs include 4 retainer rings, 2 slide rings, 2 O-rings, and 2 High Temp rings.
-
$50.00Single Gas Appliance Kit. Pro-Flex CSST is an approved alternative gas piping system to traditional rigid pipe or copper tube systems. This kit has a coil of 1/2″ 25′ CSST, Appliance connector, leak detector, and Teflon Tape
-
$8.25Brass push fit coupling. Forged DZR (Dezincification) brass. Fast, trouble-free installation of copper, CPVC (Chlorinated Polyvinyl Chloride), and PEX (cross-linked polyethylene) tubing. Certified cUPC (all Canadian federal requirements and standards), NSF (National Sanitation Foundation/ANSI 61 (American National Standards Institute, AB 1953 (California’s Assembly Bill 1953) compliant, IAPMO (International Association of…
-
$8.25Brass Push Fit x MPT (male pipe thread) adapter. Forged DZR (Dezincification) brass. Fast, trouble-free installation of copper, CPVC (Chlorinated Polyvinyl Chloride), and PEX (cross-linked polyethylene) tubing.Certified cUPC (all Canadian federal requirements and standards), NSF (National Sanitation Foundation)/ANSI 61 (American National Standards Institute), AB 1953 (California’s Assembly Bill 1953) compliant,…
-
$7.15Compression coupling available in 2 different sizes, has a brass body and brass nuts, rubber gaskets, rated 125 P.S.I. at up to 210 deg. F. The coupling fits both iron pipe and copper tube as listed and is for use in piping or repair of galvanized or copper pipe. Pipe…
-
$6.651/4 turn operation. Compatible with Copper, CPVC and PEX tubing. O-ring design ensures a watertight connection. Made of lead-free brass. No additional tools required for installation. If fitting is removed, it can be reused.