-
$2.00Glue-in compression adapter glues PVC (polyvinyl chloride) fitting to convert to compression adapter. Use to join hose directly to PVC fitting or pipe.
-
$0.50Hose plug. Closes off ends of hose and allows for flushing. For water pressure up to 60 psi (pounds per square inch). Closes ends of poly hose when frequent flushing is necessary.
-
$0.40Used to join 2 lengths of drip line tubing. Can be used with water pressure up to 60 psi (pounds per square inch). Compression fitting.
-
$0.65Used to make 90 degree turns in drip tubing. Can be used with water pressure up to 60 psi (pounds per square inch).
-
$2.25Used to join hose directly to PVC fitting or pipe. Adapts connections to a water source. Standard PVC glue and primer required. 3 per card.
-
$5.90Drip hose manufactured from linear, low-density polyethylene. Contains ultra violet inhibitors which enables it to be left out year-round, buried or on the surface in any weather. It is the primary line for most drip installations.
-
$3.15Drip hose manufactured from linear, low-density polyethylene. Contains ultra violet inhibitors which enables it to be left out year-round, buried or on the surface in any weather. It is the primary line for most drip installations.
-
$6.00Supply tubing for drip irrigation with fittings. Contains pre-installed hose thread swivel adapter and end plug for easy connection to water source. Compatible with any hose connection. Ideal for use when expanding any drip system.
-
$25.00Drip hose manufactured from linear, low-density polyethylene. Contains ultra violet inhibitors which enables it to be left out year-round, buried or on the surface in any weather. It is the primary line for most drip installations.
-
$3.50Adjustable 8-outlet manifold uses patented technology to convert a traditional underground sprinkler system to a micro-irrigation drip system. Waters up to 8 plants with 1 unit. Fully adjustable ports with flows that can be individually set. Swivel arms aid in fine-tuning outlet tubing position. Built-in filter extends system lifespan by…
-
$2.15Waters (2) 30 degree patterns each with a radius up to 8 Ft. Adjustable length of up to 16 Ft. x 4 Ft. Sprayer inlet: 10-32 NFT (national female thread). 5 per card.
-
$2.50Easy-to-install. A simple hand maneuver will snap this piece in place, puncture the supply line, and be ready to add feeder lines. Eliminates the need for a hole punch and connectors to get the water flowing.
-
$6.25Ideal for maintaining low volume watering systems. Convenient, compact plastic case has sections holding the parts needed to repair, change, or expand an installation. The case is ideal for keeping leftovers. Colorful, 56-piece convenient kit includes: Each type of 1/4 In. fitting, filter washer, special hole punch, mini in-line drippers,…
-
$4.50Adjustable mister and 4 In. high-density polyethylene risers with 1/4 In. barbed adapters. Adjustable from a fine to a heavy mist up to 3 Ft. circle. Flow rate: 4 to 7 GPH (gallons per hour) at 25 psi (pounds per square inch).
-
$2.15Jet misters come mounted on 4 In. high-density polyethylene risers with 1/4 In. barbed adapters. Mists approximately 3 Ft. circle. Use to spray ferns and other tropical plants in hanging containers in greenhouses and atriums. Flow rate: 6 GPH (gallons per hour) at 25 psi (pounds per square inch). 5…
-
$4.90Ideal to use for watering ground cover, hillsides, flower beds, new plantings, and seed germination where routing of drippers to base of each plant is impractical. Features adjustable flow rate from 4 to 20 GPH (gallons per hour) and spray radius of up to 15 Ft. Sprayer inlet: 10 to…