Heating Ventilation & Air Conditioning
-
$10.75Plastic vent hood faceplate with 1-piece flapper for clothes dryer and bathroom venting. Faceplate is 7.5″ W. x 8.5″ H. Fits 4″ aluminum pipe (not included). Beveled and weighted design prevents birds from pecking the flapper open and keeps flapper closed during windy conditions. Reversible trim ring allows adjustment of…
-
$7.50Wide mouth hood has an 11″ aluminum tailpipe and back plate that are riveted together for heavy duty applications. Use to vent clothes dryers and bathroom fans.
-
$18.50Adjustable periscope from 18 inches downward to 0 inches for a direct or slightly offset alignment behind dryer. Close clearance from 4-1/2 inches to 2-1/2 inches behind the dryer. These sections adjust but do not separate or reverse, some trimming may be necessary. All metal rigid construction.
-
$20.00Adjustable periscope from 18 inches to 29 inches. Used to reduce space between dryer and wall from 4-1/2 inches to 2-1/2 inches for closer clearance. Beveled ends eliminate interference with floors and side walls. Sections separate and can be reversed for easier connection. May also be used for side access…
-
$10.75Aluminum vent with a 4″ collar installs flush with eave or soffit. Used to vent clothes dryers or bathroom fans.
-
$5.25Vent has a 3″ long aluminum tailpipe for easy connection. Install on eave or soffit to vent clothes dryers or bathroom fans.
-
$5.65Round vent is UV (ultraviolet) stabilized polymer resin with a molded in mesh screen. Extra long collar for better duct connection. Secure friction fit in the soffit.
-
$7.75Offset dryer elbow turns 90 degrees within 4-1/2-inch clearance. Snap-lock fittings. Rotating collar. Includes clamp for dryer connection. Used where outlet pipe on dryer is projecting outward up to 2-1/2 inches and cannot be trimmed. Heavy-gauge drawn aluminum. Bagged.
-
$7.75Offset dryer wall elbow turns 90 degrees within 4-1/2-inch clearance. Snap-lock fittings. Rotating collar. Includes clamp for wall connection. Used where outlet pipe in wall is projecting outward up to 2-1/2 inches and cannot be trimmed. Heavy-gauge drawn aluminum. Bagged.
-
$6.65Round vent is UV (ultraviolet) stabilized polymer resin with a molded in mesh screen. Extra long collar for better duct connection. Secure friction fit in the soffit.
-
$9.00Thick PVC flexible duct has multiple uses such as general venting for bathroom fans and also craft projects. Durable steel wire supported construction resists crushing and air leakage. 2 clamps included.
-
$10.001 Male snap-lock fitting, 1 soft-cuff end. Male fitting acts as a pipe coupling or snaps to any other snap-lock fitting. Use a clamp (not included) to connect soft-cuff end, even to saf-t-duct components. Pipe stretches to 5′ (ships compressed, 18″).
-
$24.00The Over The Top universal dryer vent kit feature two 4-foot sections of pipe attached to two close elbows and two clamps for wall and dryer connections. This 8-foot kit installs in 4.5″ when the wall pipe is trimmed flush and the wall plate is used. Snap-Lock swiveling collars on…
-
$8.25Meets UL listed (Underwriters Laboratories) standard for dryer transition duct. Steel wire support, multi-ply design of aluminum and polyester. Used to vent clothes dryers and bathroom fans.
-
$12.00Clamps are not necessary to connect snap-lock fittings. Snap 2 or more pieces together to obtain lengths needed. Stretches to 6′ (ships compressed, 24″).
-
$75.00Portable electric baseboard heater – 1500W, 120V, 12.5A. Convection air heats entire room not “space”. Lightweight and portable with built-in handles to make it easy to move from room to room. Built in T-stat with large dial and “Off”. Steel sheath with fin construction provides durability and extends life. 49…