Stove Pipe Insulated Stove Pipe
-
$200.00Provides the support package and termination parts for a chimney that is supported by a flat ceiling and passes through an attic area and penetrates a 2/12 to 6/12 pitch roof. Contains: Round top, storm collar, flashing, attic insulation shield, finish support package, and a smokepipe adapter with coupler.
-
$112.50Used to start chimneys indoors or outdoors using a wall support assembly or masonry pier. Insulated tee cap included, removable for inspection and cleanout. Maximum height of chimney which can be supported by an insulated tee is 50′.
-
$8.50For increasing stability of Sure-Temp stainless steel insulated pipe. Inward flanges around the band fit into grooves at pipe joints. Reinforces joints of chimney suspended below support assemblies and prevents accidental uncoupling. Reinforces joints of chimney extending above roof and should be used at every joint. Stainless steel. Locking bands…
-
$172.50For installation of a chimney in a cathedral or pitched ceiling such as standard A-frame construction. The Pitched Ceiling Support Kit provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and adjustable flashing. Contains: Round top, storm collar, roof support package, adjustable…
-
$122.50Includes the basic components for a standard installation (2/12 – 6/12). Contains 1 round top, 1 storm collar, and 1 roof flashing. For use with Model SSII Type HT chimneys.
-
$231.95For a wall supported chimney system with a horizontal connector passing through an exterior wall, connecting to a Tee and running vertically up the exterior wall to termination above the roof line. The Thru-the-Wall Support Kit provides all necessary parts for a complete installation with the exception of required insulated…
-
$55.00For use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. Also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may only be fastened to the wall below the plate for chimneys which penetrate through the…
-
$57.50Stainless steel outer casing and inner liner. Double-wall pipe with solid pack insulation. Tested to withstand 2100 F (degree Fahrenheit). UL (Underwriters’ Laboratories) listed. This test helps to prevent product damage or structural hazard during brief periods of this excessive chimney temperature. Normal temperature is 1000 F. Pipe Data: Minimum…
-
$115.00DS-VK vertical installation kit. Telescoping length and pipe adapter with finishing sleeve. Adjustable from 38″ to 68″. Pipe adapter with finishing sleeve connects Sure-Temp chimney to telescoping length, which is designed to directly connect to a top outlet appliance. Designed with double wall construction and a durable stainless steel inner…
-
$44.00Stainless steel outer casing and inner liner. Double-wall pipe with solid pack insulation. Tested to withstand 2100 F (degree Fahrenheit). UL (Underwriters’ Laboratories) listed. This test helps to prevent product damage or structural hazard during brief periods of this excessive chimney temperature. Normal temperature is 1000 F. Pipe Data: Minimum…
-
$30.00Adjustable for various roof pitches from 0/12 to 6/12. Covers 2 In. space around chimney where pipe passes through a sloped ceiling for an attractive finish. Matte black finish. No assembly required.
-
$60.00Used wherever a ceiling support, finish support, or firestop is installed below an open attic. Required to guard against the hazard of blown-in or blanket insulation filling any framed opening or contacting the chimney and possible storage of combustibles against the chimney. Usable for new and retrofit installations. Half cylinder…
-
$100.00For use when installing a Model SSII chimney in an A-frame, mobile home, or in a ceiling under a narrow section of roof. It provides a finished installation at a ceiling level and will support up to 20′ of 6″ or 8″ diameter chimney. The part also can be used…
-
$77.50With proper framing, both ceiling supports assure at least 2″ minimum clearance to combustibles at the support level and can carry up to 50′ of vertical chimney height. Square trim plate. Matte black finish.
-
$19.00Round collar fits over lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Dripless Smoke Pipe Adapter part to lower end of chimney or to insulated tee. Matte black finish.
-
$11.50Designed to fit on the round chimney pipe just above the roof flashing.The upper edge should be waterproofed with plastic sealer to prevent any water from leaking between the storm collar and chimney pipe. Part is tightened with screws or tabs after proper positioning. 5-1/2″ H.