-
$72.50Stainless steel outer casing and inner liner. Double-wall pipe with solid pack insulation. Tested to withstand 2100 F (degree Fahrenheit). UL (Underwriters’ Laboratories) listed. This test helps to prevent product damage or structural hazard during brief periods of this excessive chimney temperature. Normal temperature is 1000 F. Pipe Data: Minimum…
-
$117.50Stainless steel outer casing and inner liner. Double-wall pipe with solid pack insulation. Tested to withstand 2100 F (degree Fahrenheit). UL (Underwriters’ Laboratories) listed. This test helps to prevent product damage or structural hazard during brief periods of this excessive chimney temperature. Normal temperature is 1000 F. Pipe Data: Minimum…
-
$62.50Stainless steel outer casing and inner liner. Double-wall pipe with solid pack insulation. Tested to withstand 2100 F (degree Fahrenheit). UL (Underwriters’ Laboratories) listed. This test helps to prevent product damage or structural hazard during brief periods of this excessive chimney temperature. Normal temperature is 1000 F. Pipe Data: Minimum…
-
$42.50For freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily onto top of roof through opening that allows 2″ clearance. Maximum length of chimney which can be suspended below is 20′. Maximum total length is 30′. The Roof Support Kit (RSK)…
-
$8.00For use on the outside wall as a trim plate or exterior shield. Use only with Selkirk pellet stove pipe. Overall size is 12-1/2 X 12-1/2.
-
$4.003″ storm collar. Type L insulated pipe for pellet stove applications. Used to provide a weather proof seal to pipe above roof flashing. Seal inner edge with hi-temp silicone sealant. Size: A 3-5/8″.
-
$16.50For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Holds pipe 3″ from wall. Galvanized.
-
$205.003″ pellet vent through the wall kit includes 1 pipe adaptor, 1 wall thimble, 1 tee with cleanout, 5-1′ pipe lengths, 1 wall strap, one 90 deg. elbow, and 1 horizontal cap.
-
$32.503″ 90 deg (degree) angle elbow. Type L insulated pipe for pellet stove applications. Used to orient pipe between vertical and horizontal orientation. Factory sealed at couplers to prevent leakage. Size: A = 5-13/16. Stainless steel liner and galvanized jacket.
-
$31.503″ 90 deg (degree) angle elbow. Type L insulated pipe for pellet stove applications. Used to orient pipe between vertical and horizontal orientation. Factory sealed at couplers to prevent leakage. Size: A = 5-13/16. Stainless steel liner and galvanized jacket.
-
-
$21.50Adjustable length eliminates the need to cut pipe. Adjustable length simply slides over another VP length. Maximum installed 10-1/2″ pellet stove pipe. Adjustable to 8″ shorter. 1-1/2″ overlap size. 3″ I.D. x 12″ overall length. Includes (2) #8 1/4″ screws.
-
$50.00Adjustable length eliminates the need to cut pipe. Adjustable length simply slides over another VP length. Maximum installed 10-1/2″ pellet stove pipe. Adjustable to 8″ shorter. 1-1/2″ overlap size. 3″ I.D. x 12″ overall length. Includes (2) #8 1/4″ screws.
-
$15.00For use as roof flashing. Use only with Selkirk pellet stove pipe. Keeps water and other debris from entering between the pipe and roof. Adjustable pitch.
