Evaporative Coolers & Parts Unions Couplings & Drain Fittings
-
-
$7.003/4″ Female hose inlet x 3/4″ Male hose outlet. With 1/8″ FIPS side tap. Cast brass body.
-
$1.00Use when connecting poly tube to compression fittings for an evaporative cooler’s water supply line. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$0.65Connects pump hose to water distributor head. 1/2″ I.D. barb x 1/4 MPT. 120 deg. angle.
-
$3.00Attach to metal or PVC pipe, or garden hose. Use the side tap to create water supply line to evaporative cooler.
-
$3.50Used in the creation of an evaporative cooler’s water supply line. It connects to separate sections of poly or copper tube. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$1.15Connects 1/4 In. water lines, any combination of material. Includes poly tube adapter. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces. Carded.
-
$11.001/4 In. compression. Heavy-duty brass body, brass plunger, arm, and stem. Polypropylene float. 2-piece arm with adjustable screw. Bronze is resistant to corrosion.
-
$6.501/4 In. compression. Brass body casting, arm, and stem. Polypropylene float, plunger rotates to discourage alkali deposits.
-
$3.10Connects 1/4 In. poly tubing to 1/8 In. MPT. Low lead level – less than 0.25%. 1 per card.
-
$8.001/4 In. compression. Heavy-duty bronze body, brass plunger, arm, and stem. Polypropylene float. 3 In. brass arm. Bronze is resistant to corrosion.
-
$4.151/4 In. compression. Brass inlet, arm, and stem. Polypropylene float and cover. Noiseless and noncorrosive.
-
$3.00Install into the 1/8″ side-tap of a Brass Sill Cock to create a water supply line for an evaporative cooler. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$0.902-pack. Contains 1/4″ compression nut and 1/4″ compression sleeve. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$1.15Insert for connecting plastic tubing to any 1/4″ brass fitting. Clamshell. 4-pack. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
-
$0.90Adapts poly tube to brass fittings using 1/4″ CC/sleeve. 4 per card. manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.