Hardware
- Hardware Angle Bar & Rod Stock
- Hardware Builder'S Hardware
- Hardware Cabinet & Drawer Hardware
- Hardware Collated Fasteners
- Hardware Door Hardware
- Hardware Fasteners
- Hardware Furniture Parts & Accessories
- Hardware Hinges
- Hardware Key Accessories Rings & Chains
- Hardware Key Blanks
- Hardware Key Machine Parts
- Hardware Lockset Parts & Accessories
- Hardware Locksets And Door Knobs
- Hardware Mailboxes & Accessories
- Hardware Metal Sheets
- Hardware Mobile Home Hardware & Accessories
- Hardware Padlocks & Accessories
- Hardware Rv Hardware & Accessories
- Hardware Signs Numbers & Letters
- Hardware Springs
- Hardware Tags
- Hardware Tie Downs & Earth Anchors
- Hardware Weatherproofing & Weatherstripping
- Hardware Window Films
- Hardware Window Hardware
- Hardware Wire & Wire Tools
-
$6.50The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2″ joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are…
-
$5.50The BC series offers dual-purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2″ joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not…
-
$18.50The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2″ joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are…
-
$3.90These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating.
-
$14.40Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x…
-
$42.40Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts.
-
$42.40Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts.
-
$29.00Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x…
-
$6.47Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designed for schools and other structures requiring additional strength, longevity, and safety factors. 14-gauge galvanized steel.
-
$8.50Brick ties provide a connection between the wood structure and brick facade. Galvanized, 22-gauge. Holes sized for 10d commons.
-
$0.75Offers various solutions for connecting the stud to the top and bottom plates. 20-gauge galvanized steel. May also be available with ZMAX coating.
-
$10.75Premium grade 304 stainless steel prevents staining and streaking due to fastener corrosion. Slim gauge and blunt diamond point minimize splitting. Ring shanks provide superior holding power to guard against popping . Checkered heads eliminate glaring. Can be used for all types of wood siding. Underhead fillet seats flush or…
-
$13.62The EPC cap provides a custom connection for post-beam combinations at medium design loads. Minimum 4×4 post size. 3-9/16″ W1 x 3-9/16″ W2 x 2-5/8″ L1 x 11″ L2 x 7-5/16″ L3. Use 16d fasteners. Do not install bolts into pilot holes. 16-gauge galvanized steel.
-
$3.80These connectors are always installed in pairs and connect 6X lumber at right angles. Eliminates driving nails into end grain. Nails can be added in triangle holes to increase uplift load capacity. Install with (Min) 8-16d fastener on beam, 6-16d on post; (max) 10-16d fastener on beam, 10-16d on post.…
-
$8.04The UFP (Universal Foundation Plate) provides a retrofit method to anchor the mudsill to the side of the foundation in applications where minimum vertical clearance exists. Also designed to perform when the mudsill is offset from the foundation up to 2-1/2″ or extended beyond the foundation up to 1/2″. May…
-
$1.00Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.