Hardware
- Hardware Angle Bar & Rod Stock
- Hardware Builder'S Hardware
- Hardware Cabinet & Drawer Hardware
- Hardware Collated Fasteners
- Hardware Door Hardware
- Hardware Fasteners
- Hardware Furniture Parts & Accessories
- Hardware Hinges
- Hardware Key Accessories Rings & Chains
- Hardware Key Blanks
- Hardware Key Machine Parts
- Hardware Lockset Parts & Accessories
- Hardware Locksets And Door Knobs
- Hardware Mailboxes & Accessories
- Hardware Metal Sheets
- Hardware Mobile Home Hardware & Accessories
- Hardware Padlocks & Accessories
- Hardware Rv Hardware & Accessories
- Hardware Signs Numbers & Letters
- Hardware Springs
- Hardware Tags
- Hardware Tie Downs & Earth Anchors
- Hardware Weatherproofing & Weatherstripping
- Hardware Window Films
- Hardware Window Hardware
- Hardware Wire & Wire Tools
-
$0.40The SSP (single stud plate) tie offers various solutions for connecting the stud to the top and bottom plates. All models can be used to make a connection to either the top or bottom plate, and several are suitable for double top plates and studs. Material: SSP 18-gauge. 1-3/8″ W.…
-
$1.57Simpson Strong-Tie couple nuts are tested and load rated to join anchor and threaded rod bolts. Nuts have “witness” holes allowing for use to verify when rods are installed. The positive stop feature helps ensure even threading into each end of the nut.
-
$3.65The SSTB anchor bolt is designed for maximum performance as an anchor bolt for holdowns and Simpson Strong-Tie Strong-Wall shearwalls. Extensive testing has been done to determine the design load capacity of the SSTB when installed in many common applications.
-
$1.90Designed for optimum performance in both cracked and uncracked concrete under both static and seismic-loading conditions. Self-undercutting, nonexpansion characteristics of the Titen HD anchor make it ideal for structural applications even at reduced edge distances and spacings. Recommended for permanent dry, interior noncorrosive environments or temporary outdoor applications. Zinc-plated.
-
$3.30Designed for optimum performance in both cracked and uncracked concrete under both static and seismic-loading conditions. Self-undercutting, nonexpansion characteristics of the Titen HD anchor make it ideal for structural applications even at reduced edge distances and spacings. Recommended for permanent dry, interior noncorrosive environments or temporary outdoor applications. Zinc-plated.
-
$1.84Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections. 3″ x 3″ bearing plates offer increased flexibility while meeting the latest code requirements. The slotted hole allows for adjustability to account for bolts that are not in the middle of…
-
$3.29Simpson Strong-Tie couple nuts are tested and load rated to join anchor and threaded rod bolts. Nuts have “witness” holes allowing for use to verify when rods are installed. The positive stop feature helps ensure even threading into each end of the nut.
-
$10.04The reusable AnchorMate anchor bolt holder is designed to hold the anchor in place before the concrete pour, as required in some jurisdictions. The gripping section secures the bolt in place without a nut for quicker setup and teardown. It also protects the threads from wet concrete and simplifies trowel…
-
$25.00Attaches to gable trusses and provides good lateral wind resistance. 14-gauge galvanized steel. Kits contain 10 gusset angle ties and are packaged with Simpson Strong-Tie Strong-Drive screws (SDS) and 2-3/4″ Titan screws. For masonry.
-
$2.75Simpson Strong-Tie connectors make projects easier to build while making them stronger and safer. They are engineered and tested to perform and are manufactured to the highest quality standards. Whether working on a home project or building a structure to
-
$8.25The patent-pending LSSR light slopeable/skewable rafter hanger is the next generation of a field-adjustable rafter hanger. One of its key features is that it can be installed after all of the rafters have been tacked into place. A versatile hanger.
-
$12.50These self counter sinking bugle heads set flush with work surface. The square drive, No. 2 head, is deep and cleanly formed and is coated with a nonstick clear, dry, lubricating film which enhances driveability. Self-tapping coarse threads and self-drilling points with the Beaver Bite requires less driving torque. Grade…
-
$62.50These self counter sinking bugle heads set flush with work surface. The square drive, No. 2 head, is deep and cleanly formed and is coated with a nonstick clear, dry, lubricating film which enhances driveability. Self-tapping coarse threads and self-drilling points with the Beaver Bite requires less driving torque. Grade…
-
$62.50These self counter sinking bugle heads set flush with work surface. The square drive, No. 2 head, is deep and cleanly formed and is coated with a nonstick clear, dry, lubricating film which enhances driveability. Self-tapping coarse threads and self-drilling points with the Beaver Bite requires less driving torque. Grade…
-
$12.75The small deeply countersunk heads and slender shanks are easily driven flush with or below the surface. Ideal for fastening corner boards, balusters, handrails, piers and docks, or any decking work. 1 square drive bit is included with each box. Grade 305 stainless steel. Suitable for new treated lumber. Coarse…
-
$65.00The small deeply countersunk heads and slender shanks are easily driven flush with or below the surface. Ideal for fastening corner boards, balusters, handrails, piers and docks, or any decking work. 1 square drive bit is included with each box. Grade 305 stainless steel. Suitable for new treated lumber. Coarse…