Hardware
- Hardware Angle Bar & Rod Stock
- Hardware Builder'S Hardware
- Hardware Cabinet & Drawer Hardware
- Hardware Collated Fasteners
- Hardware Door Hardware
- Hardware Fasteners
- Hardware Furniture Parts & Accessories
- Hardware Hinges
- Hardware Key Accessories Rings & Chains
- Hardware Key Blanks
- Hardware Key Machine Parts
- Hardware Lockset Parts & Accessories
- Hardware Locksets And Door Knobs
- Hardware Mailboxes & Accessories
- Hardware Metal Sheets
- Hardware Mobile Home Hardware & Accessories
- Hardware Padlocks & Accessories
- Hardware Rv Hardware & Accessories
- Hardware Signs Numbers & Letters
- Hardware Springs
- Hardware Tags
- Hardware Tie Downs & Earth Anchors
- Hardware Weatherproofing & Weatherstripping
- Hardware Window Films
- Hardware Window Hardware
- Hardware Wire & Wire Tools
-
$3.40For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$17.50For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$3.60For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$110.00Oil-quenched hardened ring shank nails comply with the ASTM standard specification F1667 for driven fasteners. Safety glasses recommended when driving hardened nails. 50 lb. bulk carton.
-
$4.70Spiral double hot-dip galvanized small head. Multiple uses with siding, trim, fencing, decking, etc. All-around nail. Extra stiff shank for easy driving. Self-seating head. Stormguard double dipped in molten zinc. ACQ compatible. 2″ length. 12-gauge. 3/16″ head. Approximately 181 nails per lb. Manufacturer lifetime warranty.
-
$15.00Spiral double hot-dip galvanized small head. Multiple uses with siding, trim, fencing, decking, etc. All-around nail. Extra stiff shank for easy driving. Self-seating head. Stormguard double dipped in molten zinc. ACQ compatible. 2″ length. 12-gauge. 3/16″ head. Approximately 181 nails per lb. Manufacturer lifetime warranty.
-
$17.50For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$3.50For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$4.90Ideal for attaching wood members to cinder block walls as well as to fresh concrete. The blunt point and tapered shank cause minimal spalling during penetration and offer even greater pull-out resistance than wire masonry nails. 3/4″ penetration is recommended. Safety glasses are recommended when driving these nails. Sizes: 1…
-
$3.50For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$3.00Ideal for general construction, carpentry, and framing. Smooth shank. Bright finish. Flat head, diamond point.
-
$12.50Ideal for general construction, carpentry, and framing. Smooth shank. Bright finish. Flat head, diamond point.
-
$18.00Double hot dipped galvanized ring shank nails for the new treated lumber. Made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring and spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip…
-
$117.50Double hot dipped galvanized ring shank nails for the new treated lumber. Made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring and spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip…
-
$18.00For all types of pressure treated wood applications – patio/porch decks, steps, fences, and docks. Nails are dipped twice in molten zinc for a uniform coating. Nails are made from stiffer high-carbon steel so shanks can be drawn slimmer to help reduce wood splits without undue nail bending. Nails have…
-
$117.50For all types of pressure treated wood applications – patio/porch decks, steps, fences, and docks. Nails are dipped twice in molten zinc for a uniform coating. Nails are made from stiffer high-carbon steel so shanks can be drawn slimmer to help reduce wood splits without undue nail bending. Nails have…