Hardware Fasteners
-
$22.50Hardened steel screw with a 1/4 In. hex head drive for quick, no slip installation. For attaching metal roofing and siding to wood framing. The long life finish on the colored screw is a 3 step process beginning with a galvanized plating and then an oxy seal is applied to…
-
$5.15Ring shank, hot galvanized nail. Neoprene flat washer. For steel and fiberglass roofing. Neoprene washer seals hole that is made when driven. All sizes are 10-gauge with 7/16″ head size. 1 lb. box.
-
$20.001-1/2″ length. 11-gauge. Smooth shank, diamond point. Extra large head. 1 lb. box. For attaching slate roofing, clay tile and other decorative elements.
-
$6.90Already assembled, with a ring shank nail. Round 1 In. plastic insulation caps. Used for fastening foamboard, roofing felt, insulation, house wraps, film, and more.
-
$9.25This painted trim nail comes in a 1 lb. box, approximately 649 trim nails per pound, 1-1/4″ in length. Wire diameter is 15-gauge or .072″. Head diameter is 11/64″. The T304 grade stainless steel provides more than adequate protection from corrosion in most commonly encountered applications of repair or upgraded…
-
$9.25This painted trim nail comes in a 1 lb. box, approximately 649 trim nails per pound, 1-1/4″ in length. Wire diameter is 15-gauge or .072″. Head diameter is 11/64″. The T304 grade stainless steel provides more than adequate protection from corrosion in most commonly encountered applications of repair or upgraded…
-
$9.25This painted trim nail comes in a 1 lb. box, approximately 649 trim nails per pound, 1-1/4″ in length. Wire diameter is 15-gauge or .072″. Head diameter is 11/64″. The T304 grade stainless steel provides more than adequate protection from corrosion in most commonly encountered applications of repair or upgraded…
-
$9.25This painted trim nail comes in a 1 lb. box, approximately 649 trim nails per pound, 1-1/4″ in length. Wire diameter is 15-gauge or .072″. Head diameter is 11/64″. The T304 grade stainless steel provides more than adequate protection from corrosion in most commonly encountered applications of repair or upgraded…
-
$13.007/16″ flat head. 11-gauge diamond point. Wide head aids holding and reduces pull through. For securing roofing asphalt shingles, felt to wood substrates, or insulation board.
-
$13.25Extra large head aids holding and reduces pull through. For securing roofing asphalt shingles, felt to wood substrates, or insulation board. Hot galvanized for extra long life. 11-gauge.
-
$6.90Already assembled, with a ring shank nail. Round 1 In. plastic insulation caps. Used for fastening foamboard, roofing felt, insulation, house wraps, film, and more.
-
$2.407/16″ flat head. 11-gauge diamond point. Wide head aids holding and reduces pull through. For securing roofing asphalt shingles, felt to wood substrates, or insulation board.
-
$11.50Used to connect landscape timbers, securing railroad ties, and thick members used in log home construction. Galvanized with a flat smooth countersunk head and a diamond point. Spiral shank. Compliant for treated lumber. Hot galvanized anchor bolts and plates are recommended when working with treated lumber. Exterior use. 12-pieces per…
-
$17.50For pressure treated lumber, galvanized for rust prevention. Spiral/screw shank for penetration and holding power.
-
$17.50Ring shank deck nail for exterior use. Ridges around shank to increase the holding power. Used for patio and deck construction.
-
$16.50Thinner smooth shank than common nail, reduces wood splitting. Flat head. Diamond point. For boxes, crates, and light-duty construction. Exterior use.