Fasteners Nails
-
$18.00Double hot dipped galvanized ring shank nails for the new treated lumber. Made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring and spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip…
-
$117.50Double hot dipped galvanized ring shank nails for the new treated lumber. Made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring and spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip…
-
$18.00For all types of pressure treated wood applications – patio/porch decks, steps, fences, and docks. Nails are dipped twice in molten zinc for a uniform coating. Nails are made from stiffer high-carbon steel so shanks can be drawn slimmer to help reduce wood splits without undue nail bending. Nails have…
-
$117.50For all types of pressure treated wood applications – patio/porch decks, steps, fences, and docks. Nails are dipped twice in molten zinc for a uniform coating. Nails are made from stiffer high-carbon steel so shanks can be drawn slimmer to help reduce wood splits without undue nail bending. Nails have…
-
$110.00Oil-quenched hardened ring shank nails comply with the ASTM standard specification F1667 for driven fasteners. Safety glasses recommended when driving hardened nails. 50 lb. bulk carton.
-
$26.50Ideal for attaching wood members to cinder block walls as well as to fresh concrete. The blunt point and tapered shank cause minimal spalling during penetration and offer even greater pull-out resistance than wire masonry nails. 3/4″ penetration is recommended. Safety glasses are recommended when driving these nails. Sizes: 1…
-
$5.00Ideal for attaching wood members to cinder block walls as well as to fresh concrete. The blunt point and tapered shank cause minimal spalling during penetration and offer even greater pull-out resistance than wire masonry nails. 3/4″ penetration is recommended. Safety glasses are recommended when driving these nails. Sizes: 1…
-
$12.50Countersunk head sinks flush with surface; holds fast in framing permanent construction. Cement coated. Checkered countersunk head and diamond point.
-
$3.00Countersunk head sinks flush with surface; holds fast in framing permanent construction. Cement coated. Checkered countersunk head and diamond point.
-
$16.50Sharp ring shanks insure holding power. Regular steel shank. Recommended by plywood producers for underlayment, sheathing, and sub-floor applications.
-
$21.50Specially designed for split-prone woods. Annular ring shank for extra holding power. Double dipped in molten zinc. Checkered head enhances paint adhesion.
-
$4.25Smooth, slim shank splitproof nails are suited for use with hardwood trim. Made from a high-carbon steel wire. Available in 1 lb. and 5 lb. boxes only.
-
$18.50Extra stiff stock allows them to be driven through 2 thicknesses of hardboard siding without bending. Head drives flush. Double dipped in molten zinc. Recommended by hardboard siding producers. Spiral type provides added holding power. Head: 3/16″.
-
$112.50The extra stiff stock used in these nails allows them to be driven through 2 thicknesses of hardboard siding without bending. Head drives flush. Double dipped in molten zinc. Recommended by hardboard siding producers. Packaged in 50 lb. Length: 2-1/2
-
$122.50Extra stiff stock allows them to be driven through 2 thicknesses of hardboard siding without bending. Head drives flush. Double dipped in molten zinc. Recommended by hardboard siding producers. Spiral type provides added holding power. Head: 3/16″.
-
$20.00Specially designed for split-prone woods. Slim, sturdy shank and blunt point virtually eliminate splits. Double dipped in molten zinc. Checkered head enhances paint adhesion. Length: 2-1/2″. Head: 7/32″. 189 per lb. 13-gauge.