Fasteners Nails
-
$4.25Smooth, slim shank splitproof nails are suited for use with hardwood trim. Made from a high-carbon steel wire. Available in 1 lb. and 5 lb. boxes only.
-
$22.00Sharp ring shanks insure holding power. Regular steel shank. Recommended by plywood producers for underlayment, sheathing, and sub-floor applications.
-
$4.25Sharp ring shanks insure holding power. Regular steel shank. Recommended by plywood producers for underlayment, sheathing, and sub-floor applications.
-
$18.00Double hot dipped galvanized ring shank nails for the new treated lumber. Made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring and spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip…
-
$122.50Double hot dipped galvanized ring shank nails for the new treated lumber. Made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring and spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip…
-
$17.50For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$110.00For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$3.60For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.
-
$26.50Ideal for attaching wood members to cinder block walls as well as to fresh concrete. The blunt point and tapered shank cause minimal spalling during penetration and offer even greater pull-out resistance than wire masonry nails. 3/4″ penetration is recommended. Safety glasses are recommended when driving these nails. Sizes: 1…
-
$5.00Ideal for attaching wood members to cinder block walls as well as to fresh concrete. The blunt point and tapered shank cause minimal spalling during penetration and offer even greater pull-out resistance than wire masonry nails. 3/4″ penetration is recommended. Safety glasses are recommended when driving these nails. Sizes: 1…
-
$15.00Hot-dipped galvanized. Designed to attach treated wood sill plates to newly poured concrete. New treated lumber compatible. For best results, a drilling hammer is recommended. True hot-dip galvanizing reduces the temper of hardened square cut nails, so it is important that the nails are applied to green concrete. Hot-dipped galvanized…
-
$6.40Hot-dipped galvanized. Designed to attach treated wood sill plates to newly poured concrete. New treated lumber compatible. For best results, a drilling hammer is recommended. True hot-dip galvanizing reduces the temper of hardened square cut nails, so it is important that the nails are applied to green concrete. Hot-dipped galvanized…
-
$12.50Ideal for general construction, carpentry, and framing. Smooth shank. Bright finish. Flat head, diamond point.
-
$85.00Ideal for general construction, carpentry, and framing. Smooth shank. Bright finish. Flat head, diamond point.
-
$3.10Ideal for general construction, carpentry, and framing. Smooth shank. Bright finish. Flat head, diamond point.
-
$3.25For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3″ or more from edge of masonry or block allowing 3/4″ penetration. Safety glasses recommended when driving hardened nails. 5/16″ head. 9-gauge.