Hardware Door Hardware
-
$3.00Floor and jamb mounted bottom pivot bracket for bi-fold doors. For 1 In. to 1-3/8 In. doors – maximum door weight is 30 Lb. Hardware is included. 1 per card.
-
$6.40Latch engages and disengages by rotating round thumb-turn. Reversible side plates. Mortise installation. Mortise cutout size: 1-3/4″ deep x 2-3/4″ H.
-
$3.75Nylon bottom guide tips with steel bracket adjusts for 3/4″ to 1-3/8″ thick doors, 1/8″ thick plastic shim plates to raise guide up to 5/8″ above carpet. 1 guide, 5 riser plates, 2 installation screws, and 2 plastic anchors.
-
$5.25Paneled Mirror Door roller assembly with a concave nylon roller. The grooved ball bearing nylon roller provides a smooth ride as it slide back and forth. Adjusting screw is centered on the top of the housing and the tabs on either side will insert into slots on that side and…
-
$3.50For use on wood bi-fold closet doors. Brass-plated. The hinges have a cut-out that allows for non-mortise installation. 2 per card.
-
$3.15This pocket door pull is constructed from steel and comes plated in brass. It features a rectangular design and easily fits a 7/8 x 2-5/8 in. mortise. It comes complete with fasteners for a quick and easy installation. Use on door up to 1-3/4 In. thick.
-
$2.50Injection molded plastic bottom guide fits 7/16″ thick door panels. Installed with double sided tape included. Used by several shower door manufacturers. 4-1/16″ length. Bottom mount. Material: Nylon. Color: White.
-
$13.25Black flush mount handle set. Die-cast construction fits most popular flush lock cut-outs; comes complete with keyed cylinder lock; reversible for left or right hand; complete with 4 different hook lengths. 1 inside latch with deluxe wood pull, 1 outside pull, 1 keeper, installation fasteners, 4-hook assortment, and 1 locking…
-
$7.50Standard hook. 3/8″ hook only. Die-cast construction, chrome-plated, steel hook, nite latch features, universal design, interchangeable hook is reversible. 1 inside latch and pull, 1 outside pull, 1 locking cylinder, 1 keeper, and 1 set of installation fasteners.
-
$13.50This closer features a non-handed design with adjustable closing tension. Easily mounts to the surface and can operate up to a 150 lb. load. U.L listed; half hour fire rated. 4-3/4 x 1-1/4.
-
$9.50This closer features a non-handed design with adjustable closing tension. Easily mounts to the surface and can operate up to a 150 lb. load. U.L listed; half hour fire rated. 4-3/4 x 1-1/4.
-
$12.50Die-cast aluminum with wood inside pull, designed to fit many doors. Reversible for right or left hand applications, complete with keeper. When the latch is installed into the door frame through an inside access hole, the connected lever is held in place by a flat spring as it operates the…
-
$13.25Die-cast inside pull with wood handle, 3-1/2″ hole centers, reversible, for left or right hand openings. When the latch is installed into the door frame through an inside access hole, the connected lever is held in place by a flat spring as it operates the latch up and down to…
-
$4.50This mirror door roller is constructed from nylon and comes affixed to a steel housing. It features an adjustable bottom mount design with an overall flare width of 11/16 in. This style roller is used on Manufacturers Mirror door and similar style doors. The tab on the back end of…
-
$4.00Combination set of the top pivot and guide wheel used by several bi-fold door manufacturers. Typically used on wood bi-fold doors, the top pivot is a nail on style with a 1/4 inch spring loaded pivot pin with a 3/8 inch base that fits into the pre-drilled hole. The 3/4…
-
$6.25Top pivot guide for bi-fold doors. Spring loaded 3/4 In. diameter nylon roller guide in a steel nail down base. Fits 1 In. to 1-3/8 In. thick doors. 1 per card.