Hardware Builder'S Hardware
-
$0.65For alignment control between a roof truss and non-bearing walls; the 1-1/2″ slot permits vertical truss chord movement when loads are applied. 1-1/4″ W. x 2-3/4″ H. x 1-7/8″ D.
-
$1.85Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
-
$0.90Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
-
$3.40Straps are designed to transfer tension loads in a wide variety of applications. Splitting may be a problem with installations on lumber smaller than 3-1/2″; either fill every nail hole with 10d x 1-1/2″ nails or fill every other hole with 16d common nails. Reduce the allowable load based upon…
-
$4.50Straps are designed to transfer tension loads in a wide variety of applications. Splitting may be a problem with installations on lumber smaller than 3-1/2″; either fill every nail hole with 10d x 1-1/2″ nails or fill every other hole with 16d common nails. Reduce the allowable load based upon…
-
$0.85Used to reinforce angle connections. The gusset angle’s embossed bend section provides added strength. This product can be used for many different home repair projects. 18-gauge galvanized steel.
-
$1.15Provides a tension connection between 2 wood members. Resists uplift at the heel of a truss economically. The tension bend section eliminates interference at the transition points between wood members.
-
$2.90Purlin anchors (PA) offer solutions for wood to concrete and concrete block connections which satisfy code requirements. The PA’s dual embedment line allows installation in concrete or concrete block. PA must hook around rebar. Wood splitting may occur when anchor is nailed to wood less than 3-1/2″ wide. Material: PA…
-
$7.90This embedded strap tie holdown has a high load capacity and a staggered nail pattern to help minimize splitting. The strap nailing pattern allows for nailing to the edges of double 2x’s. A slot below the embedment line allows for increased front to back concrete bond and reduced spalling. Strap…
-
$1.10Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
-
Simpson Strong-Tie 3 In. W x 10-15/16 In. H x 3-1/4 In. B 14 ga Predeflected Holdown with SDS Screws
$11.75Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$15.75Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$26.50Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$0.25Transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. 20-gauge galvanized steel. Also available with ZMAX coating.
-
$9.00Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$0.30Transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. 20-gauge galvanized steel. Also available with ZMAX coating.