Hardware Builder'S Hardware
-
$0.25Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.40Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.45Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$2.00Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections. 3″ x 3″ bearing plates offer increased flexibility while meeting the latest code requirements. The slotted hole allows for adjustability to account for bolts that are not in the middle of…
-
$0.75Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.75Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections. 3″ x 3″ bearing plates offer increased flexibility while meeting the latest code requirements. The slotted hole allows for adjustability to account for bolts that are not in the middle of…
-
$2.65Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
-
$2.75Versatile utility strap. General reinforcement angles for T intersections. These connectors are strongest when used in pairs. Galvanized.
-
$2.15Versatile utility strap. General reinforcement angles for L intersections. These connectors are strongest when used in pairs. Galvanized.
-
$7.25Versatile utility strap. General reinforcement angles for T intersections. These connectors are strongest when used in pairs. Galvanized.
-
$10.00The UFP (Universal Foundation Plate) provides a retrofit method to anchor the mudsill to the side of the foundation in applications where minimum vertical clearance exists. Also designed to perform when the mudsill is offset from the foundation up to 2-1/2″ or extended beyond the foundation up to 1/2″. May…
-
$8.25The Simpson Strong-Tie LTT is a solution for resisting tension loads when used to attach wood to concrete or masonry walls. This light tension tie is designed for horizontal purlin applications and may also be used for vertical holdown applications. For LTT tension tie applications with unreinforced concrete masonry, 3/4-in.…
-
$0.03Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8″ gap between plywood…
-
$0.90Provides a tension connection between 2 wood members. Resists uplift at the heel of a truss economically. The tension bend section eliminates interference at the transition points between wood members.
-
$6.00The BCS allows for the connection of (2) 2x’s to a 4x post or (3) 2x’s to a 6x post. Double shear nailing between beam and post gives added strength. Do not install bolts into pilot holes. Install dome nails on beam; drive nails at an angle through the beam…
-
$9.25The BCS allows for the connection of (2) 2x’s to a 4x post or (3) 2x’s to a 6x post. Double shear nailing between beam and post gives added strength. Do not install bolts into pilot holes. Install dome nails on beam; drive nails at an angle through the beam…