Hardware Builder'S Hardware
-
$3.50The DJT14Z ties 2x deck joists to the side of 4x or lesser support posts. Install with 8-16d nails or (2) 5/8″ bolts. Recommended: Install on post first. 14-gauge galvanized ZMAX coated steel.
-
$2.10Simpson Strong-Tie tension-type bridging with maximum nailing flexibility. Use just 2 of the 7 nail holes at each end. Tension bridging works only in tension, so must be used in cross pairs. Install bridging tightly; loose installation may allow floor movement. 20-gauge. Galvanized. Requires (2) 10d x 1-1/2″ fasteners per…
-
$5.25Offer effective options to resist racking during construction. Can be used to fulfill the same code bracing requirements as a 1×4 let-in brace, but more cost effective and faster to install. Not designed to replace structural panel shearwall load-carrying component. Multiple product dispenser pack weighs less than 40 lbs (pounds),…
-
$6.40An economical alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters, the unique design enables the hanger to be installed either before or after the rafter is in place. Maximum C1 force (compressive force applied over end post).
-
$4.25An economical alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters, the unique design enables the hanger to be installed either before or after the rafter is in place. Maximum C1 force (compressive force applied over end post).
-
$9.75The innovative LSSJ is ideal for connecting jack rafters to hip members. Featuring a one-sided connection point for ease of installation and a versatile hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12. The LSSJs header flange allows for easy skew…
-
$10.00The innovative LSSJ is ideal for connecting jack rafters to hip members. Featuring a one-sided connection point for ease of installation and a versatile hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12. The LSSJs header flange allows for easy skew…
-
$5.40The innovative LSSJ is ideal for connecting jack rafters to hip members. Featuring a one-sided connection point for ease of installation and a versatile hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12. The LSSJs header flange allows for easy skew…
-
$5.15The innovative LSSJ is ideal for connecting jack rafters to hip members. Featuring a one-sided connection point for ease of installation and a versatile hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12. The LSSJs header flange allows for easy skew…
-
$6.50The innovative LSSJ is ideal for connecting jack rafters to hip members. Featuring a one-sided connection point for ease of installation and a versatile hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12. The LSSJs header flange allows for easy skew…
-
$6.50The innovative LSSJ is ideal for connecting jack rafters to hip members. Featuring a one-sided connection point for ease of installation and a versatile hinged seat, the LSSJ is easily field adjustable to all typical rafter slopes ranging from 0:12 to 12:12. The LSSJs header flange allows for easy skew…
-
$2.60Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
-
$0.65Offers various solutions for connecting the stud to the top and bottom plates. 20-gauge galvanized steel. May also be available with ZMAX coating.
-
$3.20Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
-
$0.25Speed prong makes installation easier and faster. 90 deg. angle designed for 2×3 and 2×4 framing projects. Install with 8-8d x 1-1/2″ nails. 18-gauge galvanized steel. Also available with ZMAX coating.
-
$2.95Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating.