Hardware Builder'S Hardware
- Builder'S Hardware Braces Plates & Corner Irons
- Builder'S Hardware Bracing & Spacers
- Builder'S Hardware Deck Hardware
- Builder'S Hardware Foundation & Post Hardware
- Builder'S Hardware Framing Connectors
- Builder'S Hardware Hurricane Ties & Clips
- Builder'S Hardware Plates
- Builder'S Hardware Straps & Strapping
-
$8.50Brick ties provide a connection between the wood structure and brick facade. Galvanized, 22-gauge. Holes sized for 10d commons.
-
$0.75Offers various solutions for connecting the stud to the top and bottom plates. 20-gauge galvanized steel. May also be available with ZMAX coating.
-
$13.62The EPC cap provides a custom connection for post-beam combinations at medium design loads. Minimum 4×4 post size. 3-9/16″ W1 x 3-9/16″ W2 x 2-5/8″ L1 x 11″ L2 x 7-5/16″ L3. Use 16d fasteners. Do not install bolts into pilot holes. 16-gauge galvanized steel.
-
$3.80These connectors are always installed in pairs and connect 6X lumber at right angles. Eliminates driving nails into end grain. Nails can be added in triangle holes to increase uplift load capacity. Install with (Min) 8-16d fastener on beam, 6-16d on post; (max) 10-16d fastener on beam, 10-16d on post.…
-
$8.04The UFP (Universal Foundation Plate) provides a retrofit method to anchor the mudsill to the side of the foundation in applications where minimum vertical clearance exists. Also designed to perform when the mudsill is offset from the foundation up to 2-1/2″ or extended beyond the foundation up to 1/2″. May…
-
$1.00Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
-
$2.75Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8″ gap between plywood…
-
$0.05Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8″ gap between plywood…
-
$5.50Versatile utility strap. General reinforcement angles for L intersections. These connectors are strongest when used in pairs. Galvanized.
-
$7.40Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
-
$0.50Offers various solutions for connecting the stud to the top and bottom plates. 3-9/16″ W x 8-3/4″ L. Install with 10-10d x 1-1/2″ fasteners. 18-gauge galvanized steel.
-
$1.00Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
-
$2.95Black powder-coated light concealed flange hanger connects 2x joists to beams. Features straight edges and provides a cleaner looking installation for joist connections. 14-Ga. steel. ZMAX galvanization offers extra corrosion resistance for exterior and treated wood applications. Complements the Outdoor Accents Mission Collection. Installs with the Outdoor Accents SD10112DBB connector…
-
$9.75The DTT2 is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail…
-
$2.60Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Face-mount truss hanger has nail patterns designed specifically for shallow heel heights, so that full allowable loads (with minimum nailing) apply to heel heights as low as 3-7/8″. Minimum and maximum…
-
$0.70Speed prong makes installation easier and faster. 90 deg. angle designed for 2×3 and 2×4 framing projects. Install with 8-8d x 1-1/2″ nails. 18-gauge galvanized steel. Also available with ZMAX coating.