Hardware Builder'S Hardware
- Builder'S Hardware Braces Plates & Corner Irons
- Builder'S Hardware Bracing & Spacers
- Builder'S Hardware Deck Hardware
- Builder'S Hardware Foundation & Post Hardware
- Builder'S Hardware Framing Connectors
- Builder'S Hardware Hurricane Ties & Clips
- Builder'S Hardware Plates
- Builder'S Hardware Straps & Strapping
-
$1.70Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
-
$0.50Offers various solutions for connecting the stud to the top and bottom plates. 20-gauge galvanized steel. May also be available with ZMAX coating.
-
$6.45For fast, accurate installation of door and window headers and other cross members. HH header hangers can speed up the job, strengthen the frame and eliminate the need for trimmers.
-
$2.20The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2″ nails. 20-gauge galvanized steel.
-
$13.50Both Model No. CPTZ44 and CPTZ66 post bases incorporate a knife plate with a standoff base. It achieves a clean, concealed look while providing a 1″ standoff height above the concrete. The concealed post base is installed with 1/2″ dia (diameter) galvanized pins (supplied).
-
$3.90Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
-
$0.95The SPH is a heavy U-shaped strap designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edge. Adds strength and rigidity to…
-
$4.40Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8″ gap between plywood…
-
$0.25Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.40Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.45Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.45Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$1.90Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.75Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections.
-
$0.95Bearing plates give greater bearing surface than standard cut washers and help distribute the load at these critical connections. 3″ x 3″ bearing plates offer increased flexibility while meeting the latest code requirements. The slotted hole allows for adjustability to account for bolts that are not in the middle of…
-
$10.75Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designed for schools and other structures requiring additional strength, longevity, and safety factors. Reversed flanges allow you to hang joists and beams flush at corners or…