Hardware Builder'S Hardware
-
$8.90The ABA is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature a 1″ standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather, or water splash, or in basements. They reduce the potential for decay at…
-
$9.50The PC cap provides a custom connection for post-beam combinations at medium design loads. Miminum 4×4 post size. Do not install bolts into pilot holes. 16-gauge galvanized steel. Also available with ZMAX coating.
-
$10.75An adjustable retrofit post base with a 1″ standoff and increased capacity to resist uplift loads. Features a slot in the ABW that allows flexible positioning around the anchor bolt making precise post placement easier. The 1″ standoff helps prevent rot at the end of the post and meets code…
-
$5.25The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2″ joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are…
-
$5.00The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2″ joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are…
-
$7.75Simpson Strong-Tie column bases, install all models with bottom of base plate flush with the concrete. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Strap is 7-gauge x…
-
$3.00Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designed for schools and other structures requiring additional strength, longevity, and safety factors. Reversed flanges allow you to hang joists and beams flush at corners or…
-
$3.40Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designed for schools and other structures requiring additional strength, longevity, and safety factors. Reversed flanges allow you to hang joists and beams flush at corners or…
-
$1.41This hanger features patented double shear nailing, which distributes the load through 2 points on each joist nail for greater strength. It also allows for the use of fewer nails, faster installation, and the use of common nails for all connections. 18-gauge galvanized steel. Some double shear joist hangers are…
-
$6.40Simpson Strong Tie piling straps connect wood pilings to floor girders. Hot-dip galvanized for corrosion protection in coastal environments. Piling strap design loads must be determined by the designer for each installation. Bolts are installed both perpendicular and parallel-to-grain. Hole diameter in the part may be oversized to accommodate the…
-
$2.00The THA series extra long straps allow full code nailing and can be field-formed to give top flange hanger convenience. Designed for 4×2 floor trusses and 4x beams. Top flange installations, straighten the double shear nailing tabs and install the nails straight into the joist. For face mount installation, install…
-
$0.40Transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. 20-gauge galvanized steel. Also available with ZMAX coating.
-
$1.70The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2″ nails. 20-gauge galvanized steel.
-
$1.25The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2″ nails. 20-gauge galvanized steel.
-
$3.60Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
-
$1.25DPTZ deck post tie products are used to attach 4×4 vertical posts to the side of stringers, rims, or other wood members. Install in pairs at a recommended minimum center to center spacing of 5″. 14-gauge galvanized ZMAX coated steel. For 4×4 members. Install with (2) 3/8″ through bolts into…