Builder'S Hardware Framing Connectors
-
$0.40The SSP (single stud plate) tie offers various solutions for connecting the stud to the top and bottom plates. All models can be used to make a connection to either the top or bottom plate, and several are suitable for double top plates and studs. Material: SSP 18-gauge. 1-3/8″ W.…
-
$10.04The reusable AnchorMate anchor bolt holder is designed to hold the anchor in place before the concrete pour, as required in some jurisdictions. The gripping section secures the bolt in place without a nut for quicker setup and teardown. It also protects the threads from wet concrete and simplifies trowel…
-
$2.75Simpson Strong-Tie connectors make projects easier to build while making them stronger and safer. They are engineered and tested to perform and are manufactured to the highest quality standards. Whether working on a home project or building a structure to
-
$8.25The patent-pending LSSR light slopeable/skewable rafter hanger is the next generation of a field-adjustable rafter hanger. One of its key features is that it can be installed after all of the rafters have been tacked into place. A versatile hanger.
-
$0.80For alignment control between a roof truss and non-bearing walls; the 1-1/2″ slot permits vertical truss chord movement when loads are applied. 1-1/4″ W. x 2-3/4″ H. x 1-7/8″ D.
-
$1.75Designed for 4×2 floor trusses and 4x beams. For the THA29, nails used for joist attachment must be driven at an angle so that they penetrate through the corner of the joist and into the header. For face mount installation, install all face nails according to the table. Minimum carried…
-
$2.65Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
-
$0.03Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8″ gap between plywood…
-
$2.49The JB hanger is cost effective and features a min/max joist nailing option. Min nailing featuring positive angle nailing targets for moderate load conditions whereas the max nailing generates capacities for higher loads. The unique 2 level embossment provides added stiffness to the top flange. The joist beam hanger cannot…
-
$1.19The JB hanger is cost effective and features a min/max joist nailing option. Min nailing featuring positive angle nailing targets for moderate load conditions whereas the max nailing generates capacities for higher loads. The unique 2 level embossment provides added stiffness to the top flange. The joist beam hanger cannot…
-
$1.40The JB hanger is cost effective and features a min/max joist nailing option. Min nailing featuring positive angle nailing targets for moderate load conditions whereas the max nailing generates capacities for higher loads. The unique 2 level embossment provides added stiffness to the top flange. The joist beam hanger cannot…
-
$0.75The PF post frame hanger has patented double shear nailing to speed installation. Diamond holes allow easy alignment and attachment. Carried member nails must be driven at an angle through the joist into the header to achieve catalog table loads. Cannot be modified.
-
$1.25Dome-shaped joist nail holes that guide nails into the proper installation angle. The design also features a folded seat that raises the 2x joist very slightly above the seat radius to enable a tighter connection to the back of the hanger. These hangers cannot be modified. 20-gauge galvanized.
-
$0.75The PF post frame hanger has patented double shear nailing to speed installation. Diamond holes allow easy alignment and attachment. Carried member nails must be driven at an angle through the joist into the header to achieve catalog table loads. Cannot be modified.
-
$1.40Dome-shaped joist nail holes that guide nails into the proper installation angle. The design also features a folded seat that raises the 2x joist very slightly above the seat radius to enable a tighter connection to the back of the hanger. These hangers cannot be modified. 20-gauge galvanized.
-
$0.65For alignment control between a roof truss and non-bearing walls; the 1-1/2″ slot permits vertical truss chord movement when loads are applied. 1-1/4″ W. x 2-3/4″ H. x 1-7/8″ D.