Builder'S Hardware Foundation & Post Hardware
-
$10.00The UFP (Universal Foundation Plate) provides a retrofit method to anchor the mudsill to the side of the foundation in applications where minimum vertical clearance exists. Also designed to perform when the mudsill is offset from the foundation up to 2-1/2″ or extended beyond the foundation up to 1/2″. May…
-
$6.00The BCS allows for the connection of (2) 2x’s to a 4x post or (3) 2x’s to a 6x post. Double shear nailing between beam and post gives added strength. Do not install bolts into pilot holes. Install dome nails on beam; drive nails at an angle through the beam…
-
$9.25The BCS allows for the connection of (2) 2x’s to a 4x post or (3) 2x’s to a 6x post. Double shear nailing between beam and post gives added strength. Do not install bolts into pilot holes. Install dome nails on beam; drive nails at an angle through the beam…
-
$1.00The different models of mudsill anchors are designed for specific applications: MASB is used in concrete masonry units. MASB: Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position. Attach mudsill to anchor only after the concrete grout cures. CMU shall have…
-
Simpson Strong-Tie 3 In. W x 10-15/16 In. H x 3-1/4 In. B 14 ga Predeflected Holdown with SDS Screws
$11.75Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$15.75Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$26.50Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$9.00Predeflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. Uses Strong-Drive SDS Heavy-Duty Connector screws which install easily, reduce fastener slip, and provide a greater net section area of the post compared to bolts. Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdowns to…
-
$9.90Both Model No. CPTZ44 and CPTZ66 post bases incorporate a knife plate with a standoff base. It achieves a clean, concealed look while providing a 1″ standoff height above the concrete. The concealed post base is installed with 1/2″ dia (diameter) galvanized pins (supplied).
-
$18.00A great base for installing a 4×4 post on an existing concrete slab. This attractive post base will hold a 4×4 post securely in place. Base installs with Simpson 8-1/4″ SDS double-barrier coat or hot-dip galvanized lag screws. 12-gauge black powder-coated finish steel for corrosion resistance.
-
$10.75The CBSQ uses Simpson Strong-Tie Strong-Drive screws (SDS), which allow for fast installation, reduced reveal and high capacity, provides a greater net section area of the column compared to bolts. Install Simpson Strong-Tie SDS 1/4″ x 2″ wood screws, which are provided with the column base. (Lag screws do not…
-
$4.25The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate, 1-1/16…
-
$9.15The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate, 1-1/16…
-
$6.90The ABU is an adjustable post base which offers moisture protection and finished hardware appearance. Manufactured with ZMAX steel for enhanced corrosion resistance. These post bases feature a 1″ stand-off height above concrete floors, code-required when supporting permanent structures that are exposed to the weather, or water splash, or in…
-
$4.50The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate, 1-1/16…
-
$9.75The ABA is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature a 1″ standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather, or water splash, or in basements. They reduce the potential for decay at…