Builder'S Hardware Bracing & Spacers
-
$2.75Saw Kerf T wall bracing is used to brace wood frame wall construction with a single brace. Wall bracing can resist tension and compression loads. Product is pre-punched on both flanges making a nailing hole every 1/2″. Much stronger and faster than cutting in-lets for a 1″ x 4″ wood…
-
$0.60The staggered nail pattern accommodates 2×8 and 2×10 joists. Use just 2 of the 6 nail holes at each end. Tension bridging works only in tension, so must be used in cross pairs. Install bridging tightly; loose installation may allow floor movement. Requires (2) 6d commons per end. 22-gauge galvanized…
-
$2.10Simpson Strong-Tie tension-type bridging with maximum nailing flexibility. Use just 2 of the 7 nail holes at each end. Tension bridging works only in tension, so must be used in cross pairs. Install bridging tightly; loose installation may allow floor movement. 20-gauge. Galvanized. Requires (2) 10d x 1-1/2″ fasteners per…
-
$5.25Offer effective options to resist racking during construction. Can be used to fulfill the same code bracing requirements as a 1×4 let-in brace, but more cost effective and faster to install. Not designed to replace structural panel shearwall load-carrying component. Multiple product dispenser pack weighs less than 40 lbs (pounds),…