-
$1.352-hole rigid conduit strap. Used for providing support for rigid conduit or IMC, as required by the National Electric Code (NEC), where higher load bearing supports are needed. These zinc-plated steel straps snap onto the conduit for easy installation. cULus listed.
-
$3.30Straight liquid-tight connector. Used to terminate and seal liquid-tight flexible metal and/or non-metallic Type B conduits to an oil-tight, liquid-tight, or rain-tight box or enclosure. Connectors can be used with tapered threaded female entry or unthreaded knockout using the provided sealing washer and locknut. Sealing washer and locknut included. Durable…
-
$2.75Non-metallic straight liquid-tight connector. Used to terminate and seal liquid-tight non-metallic Type B conduits to either an oil-tight, liquid-tight, or rain-tight box or enclosure. Connectors can be used with tapered thread female entry or an unthreaded knockout using the provided sealing washer and locknut. Plastic, non-metallic construction and furnished with…
-
$1.00Reducing bushing used to decrease the entry size of threaded conduit to join conduits of two different sizes. These reducing bushings are of zinc die-cast construction. UL (Underwriter’s Laboratories) listed.
-
$0.40Zinc-plated steel reducing washer. Used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation. cULus listed.
-
$1.3090-degree squeeze connectors. Used to terminate AC, MC or FMC/RWFMC to a 1/2 In. knockout in a dry location box or enclosure where a 90-degree bend is required. These die-cast connectors are equipped with tri-combo screws and are suitable for aluminum or steel conduit. For aluminum or steel 14/2 –…
-
$1.5090-degree squeeze connectors. Used to terminate AC, MC or FMC/RWFMC to a 1/2 In. knockout in a dry location box or enclosure where a 90-degree bend is required. These die-cast connectors are equipped with tri-combo screws and are suitable for aluminum or steel conduit. For aluminum or steel 14/2 –…
-
$0.80Screw-in FMC (flexible metal conduit) connector. Used to terminate FMC to a knockout in a dry location box or enclosure. These die-cast zinc connectors are suitable for steel conduit, and they mount flush to maximize the capacity inside the box.
-
$1.50Duplex clamp conduit connector. Used to terminate two runs of AC, MC, FMC and RWFMC to a 1/2 In. knockout in a dry location box or enclosure. These die-cast connectors are a single set screw clamp type for easy installation for aluminum or steel cable and conduit. For aluminum or…
-
$1.10EMT (electrical metallic tube) to NM (non-metallic) set screw coupling. Used to provide a transition from steel EMT conduit to NM cable. These die-cast zinc couplings are suitable for use in dry locations. UL (Underwriter’s Laboratories) and CSA (Canadian Standards Association) listed.
-
$0.80AC/MC conduit connector. Used to terminate AC or MC cable to a 1/2 In. knockout in a dry location box or enclosure. These die-cast zinc connectors are suitable for use with aluminum and steel cable. For aluminum or steel 14/2 – 10/3 AC and MC (MCI, MC-PCS).
-
$0.80Straight squeeze conduit connector. Used to terminate AC, MC and FMC/RWFMC to a knockout in a dry location box or enclosure. These die-cast zinc connectors are equipped with a tri-combo screw and are suitable for aluminum or steel cable and conduit. For aluminum or steel 12/2 – 10/3 AC and…
-
$15.00EMT (electrical metallic tubing) designed for the protection and routing of wire conductors. Precision manufactured out of the finest high-grade low-carbon steel to provide the right ductility making it easy to bend while avoiding splitting, kinking, or flattening of the tube. Manufactured in accordance with ANSI (American National Standards Institute)…
-
$26.50IMC (intermediate metallic conduit) designed for the protection and routing of wire conductors. Hot dipped galvanized by immersion with a triple layer of protection against corrosion and abrasion, the interior is covered with a specially formulated, non-corrosive lubricating coating. Manufactured in accordance with ANSI (American National Standards Institute) C80.6 and…
-
$27.50RMC (rigid metallic conduit) designed for the protection and routing of wire conductors. Hot dipped galvanized on both exterior and interior surfaces with the best quality molten zinc. Manufactured in accordance with ANSI (American National Standards Institute) C80.1 and Underwriter’s Laboratories UL 6. Provides exceptional physical protection, reduces exposure to…
-
$30.00EMT (electrical metallic tubing) designed for the protection and routing of wire conductors. Precision manufactured out of the finest high-grade low-carbon steel to provide the right ductility making it easy to bend while avoiding splitting, kinking, or flattening of the tube. Manufactured in accordance with ANSI (American National Standards Institute)…