Convenience Hardware Hillman
-
$3.25Designed to fasten objects into concrete, brick and block. Specially hardened high-low thread actually cuts thread into masonry materials. A simple 2-step operation, drill then drive. Tappers may be removed and re-inserted in the same hole. Use for window installations, interior hand rails, metal door frames, storm shutters, interior lighting…
-
$4.00Hex nuts are to be used with machine bolts to adhere facing materials to prevent tension and shear movement. Specifically in wood to wood, wood to metal, or metal to metal applications. Zinc grade 2 steel hex nuts are recommended for most general uses and are corrosion resistant. Be sure…
-
$19.00Hex bolts are machine bolts that have been designed to adhere facing materials to prevent shear movement. Specifically in wood to wood, wood to metal, or metal to metal applications. Zinc grade 2 hex bolts are recommended for most general uses and are corrosion resistant for typical use. Be sure…
-
$21.50Hex bolts are machine bolts that have been designed to adhere facing materials to prevent shear movement. Specifically in wood to wood, wood to metal, or metal to metal applications. Zinc grade 2 hex bolts are recommended for most general uses and are corrosion resistant for typical use. Be sure…
-
$2.10Hardened, zinc finish split lock washer prevents nuts and bolts from turning, slipping, and coming loose because of vibration and torque. These fasteners contain split ends that help “lock” into the mating material, thus providing a locking feature when tightened beneath a nut.
-
$0.20Hex Cap screws are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. Grade 5. Heat-treated zinc finish for extra strength and wear resistance. Tighten with a wrench or drill. Nuts not included.
-
$10.00Hex bolts are machine bolts that have been designed to adhere facing materials to prevent shear movement. Specifically in wood to wood, wood to metal, or metal to metal applications. Zinc grade 2 hex bolts are recommended for most general uses and are corrosion resistant for typical use. Be sure…
-
$24.00Carriage bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self-locking to eliminate spinning and the need for…
-
$8.50Hex nuts are to be used with machine bolts to adhere facing materials to prevent tension and shear movement. Specifically in wood to wood, wood to metal, or metal to metal applications. Galvanized zinc grade 2 steel hex nuts are recommended for most general uses and are corrosion resistant. Be…
-
$7.50Hardened, yellow dichromate flat washer is used to spread the load of a screwed fastening or when the hole is a larger diameter than the fixing nut.
-
$3.40Sheet metal screws, or tapping screws, are highly versatile. Though they are designed to attach metal to metal, they’re also used to attach metal to wood, fiberglass, and plastic. Great for general repair around the house, their sharp threads draw materials together and ensure a secure hold. Sheet metal screws…
-
$1.50These nails are commonly used in carpentry applications where the nail head needs to be unobtrusive. Brite steel finish. 1.75 oz. plastic hang-up packaging.
-
$1.40Bright Wire Brad Nails are small gauge nails used for finer applications. They have small cupped heads and small diameters, perfect for sinking beneath the wood surface for concealment. Commonly used in detail carpentry applications, these nails are designed for light-duty applications. 1.75 oz. and 2 ounce plastic hang packages.…
-
$3.00A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect…
-
$11.00Zinc threaded course rods are ideal for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated finish these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products.
-
$2.25Zinc threaded course rods are ideal for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated finish these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products.