-
$1.251 size designed for 24″ and 16″ rafter spacing. Prevents ice buildup on roofs and keeps houses warmer in the winter and cooler in the summer. Made of extruded polystyrene foam. Economical option for new construction. Wide flanges for easy stapling. Perforated for easy separation. Installing attic ventilation channels between…
-
$1.50ADO’s easiest vent to install. The Durovent attic ventilation system with built-in baffle helps keep attic air flowing unobstructed from the soffit through the insulation. The 23-1/2″ x 46″ ventilation system features polystyrene construction which is lightweight and moisture-resistant. The integrated baffle means that no blocking material is needed between…
-
$2.15Tougher than Durovent and ideal for new construction and retrofit applications. Wide flanges for easy stapling. Full joist coverage for maximum air flow. Installing attic ventilation channels between the rafters or trusses provides an unobstructed air channel through the insulation. Without attic ventilation channels, air cannot flow freely from the…
-
$9.50Wall louvers are installed in the gable end of the attic and provide exhaust ventilation. Flush flange. No screens. Aluminum construction.
-
$10.00Wall louvers are installed in the gable end of the attic and provide exhaust ventilation. Flush flange. No screens. Aluminum construction.
-
$1.10The under eave vent is an intake vent that allows air to enter the attic. As an essential component of a ridge vent system the under eave vent provides the other half of the air movement equation by creating a balanced attic. 8-mesh aluminum screen. Heavy-duty aluminum construction.
-
$1.25The under eave vent is an intake vent that allows air to enter the attic. As an essential component of a ridge vent system the under eave vent provides the other half of the air movement equation by creating a balanced attic. 8-mesh aluminum screen. Heavy-duty aluminum construction.
-
$1.25The under eave vent is an intake vent that allows air to enter the attic. As an essential component of a ridge vent system the under eave vent provides the other half of the air movement equation by creating a balanced attic. 8-mesh aluminum screen. Heavy-duty aluminum construction.
-
$21.50Wall louvers are installed in the gable end of the attic and provide exhaust ventilation. Flush flange. No screens. Aluminum construction.
-
$25.008′ embossed aluminum ridge vent is installed across the entire ridge of the roof, capping off at the ridge. The ridge vent combines advanced design with simple secure installation to provide outstanding performance. External baffle deflects wind and weather over the vents to help protect the attic from rain and…
-
$25.008′ embossed aluminum ridge vent is installed across the entire ridge of the roof, capping off at the ridge. The ridge vent combines advanced design with simple secure installation to provide outstanding performance. External baffle deflects wind and weather over the vents to help protect the attic from rain and…
-
$37.50The filtered 12″ x 28′ rolled ridge vent is nail gun friendly with 2 coils of nails included. It has a built-in end plug. External baffle. Low profile creates a clean, uncluttered roofline. Provides 12 sq. in. net free area per linear foot. 3/12 to 12/12 roof pitch. Lifetime limited…
-
$35.00Turbine features: Maintenance-free dual bearing system, adjustable base, and heavy-duty polypropylene bracing system. NFA (sq. in.): 95/pc. 12″ opening. Miami-Dade County approved. Lifetime limited warranty.
-
$7.7561″ low profile, compact slant back roof vent. Constructed of high-impact plastic with UV inhibitors. Flashing dimensions: 16.5″ x 19.5″. 9″ opening provides 61 sq. in. of net free area per vent.
-
$3.40Vents for 16 In. on center framed walls, framed stucco concrete or masonry wall. Foundation vents help protect against rats, bees, snakes and other critters.
-
$3.80Vents for 16 In. on center framed walls, framed stucco concrete or masonry wall. Foundation vents help protect against rats, bees, snakes and other critters.