Lights Lamps & Fuses Auxiliary Lamps & Flashers
-
$20.0010/14-diodes, combination LED stop, turn and tail light. Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 456 series incandescent lights. Integral, dedicated…
-
$17.5010/14-diodes, combination LED stop, turn and tail light. Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 456 series incandescent lights. Integral, dedicated…
-
$4.25Operates from 9-16V. Features 2-wire, hardwired design. Ground wire includes No. 10 ring terminal. Mounts on 3″ centers. B169-18 mounting gasket included in visual pack kits, or available separately. 2-piece housing sealed with epoxy eliminates weld joints. Low cost LED alternative to traditional incandescent 154 series lights.
-
$4.50Lens is welded to housing to form single rugged unit. Kit includes 153 LED light, 150-095 mounting bracket, and plug. DOT legal when mounted horizontally with up to 32 deg. tilt back.
-
$2.35Rectangular with built-in reflector, single bulb. Low profile flange mounting. Corrosion-proof, shock-absorbing body. Designed especially for boat and snowmobile trailers and campers. 12V/.27A. Amber.
-
$5.25Rectangular, surface mount light functions as rear stop, turn, and tail light. Features polycarbonate lens, galvanized steel base plate, double filament bulb, and tough plastic guard to protect lead wires. Mounts on 3-1/2″ centers and grounds through mounting screw. Red.
-
$6.15Economical identification bar light for over 80″. Corrosion-resistant bar is powder-coated with 3 lights attached. Mounts on 16-1/2″ centers and grounds through mounting hardware. Red lights.
-
$4.90Surface mount. Stop, turn, and tail lamp. Features 3-3/4″ diameter wrap-over lens retained by two screws, black plastic housing, and two 10″ lead wires. Mounts with two 1/4″ studs on 2″ centers. Grounds through the mounting hardware. 2-5/8″ deep, not including mounting bolts. Snap on red lens. 12V/2.1A/.59A T.
-
$2.95Round surface mount. Low profile with seal-tight snap-on lens. Wedge-base bulb. Fits all popular mounting holes. 12V/.27A
-
$2.95Round surface mount. Low profile with seal-tight snap-on lens. Wedge-base bulb. Fits all popular mounting holes. 12V/.27A
-
$4.80Surface mount. Stop, turn, and tail lamp. Features 3-3/4″ diameter wrap-over lens retained by two screws, black plastic housing, and two 10″ lead wires. Mounts with two 1/4″ studs on 2″ centers. Grounds through the mounting hardware. 2-5/8″ deep, not including mounting bolts. Snap on red lens. 12V/2.1A/.59A T.
-
$7.15Pedestal mount, single face light functions as stop, turn signal, or tail light. Durable, black ABS housing with snap-on red acrylic lenses. 2 lead wires exit through 1/2″ diameter hollow mounting stud. Grounds through mounting stud. Lens overall dimentions 4-1/8″ H. x 2-3/8″ W. Interchangeable with competitive units. Red.
-
$6.40Accepts industry standard 2-prong plug. 9-16V operating range. Visual pack kits include LED light, 146-18 grommet and 162-49 plug. The 174 functionally equivalent to the 164 series. 2″.
-
$6.25Accepts industry standard 2-prong plug. 9-16V operating range. Visual pack kits include LED light, 142-18 grommet and 162-49 plug. The 172 is functionally equivalent to the 162 series.
-
$6.40Accepts industry standard 2-prong plug. 9-16V operating range. Visual pack kits include LED light, 146-18 grommet and 162-49 plug. The 174 functionally equivalent to the 164 series. 2″.
-
$6.25Accepts industry standard 2-prong plug. 9-16V operating range. Visual pack kits include LED light, 142-18 grommet and 162-49 plug. The 172 is functionally equivalent to the 162 series.