$3.90
10000 in stock
Combination of a 1-1/4 inch diameter nylon concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a roll pin, drive pin, binder post and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.
| Weight | 0.1 kg |
|---|
Screw into the ground to hold down tents, canopies, storage buildings, fencing, playground equipment, trees, planes, as well as hundreds of other uses. Not for use on manufactured homes, refer to manufactured home anchors and accessories.
Helps protect expensive units from damage caused by rain, snow, and sleet. Made of heavy-gauge plastic, winterized to stand up to the elements. Elastic straps secure cover for a tight fit. 9 mil. thickness.
Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete, stone, brick, and block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required.
100-piece kit includes: 11 each No. 8×1-1/4″ Phillips/slotted pan head tapping screw Type AB, zinc-plated; 15 each No. 8-10×7/8″ plastic anchor conical type – red; 24 each No. 6×1″ Phillips/slotted pan head tapping screw type AB, zinc-plated; 15 each No. 8×1″ Phillips/slotted pan head tapping screw Type AB, zinc-plated; 24…
10000 in stock